close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

.308 SubSonic Load Help

LinkBack Thread Tools Display Modes
  #1  
Unread 08-13-2005, 04:05 PM
Bronze Member
 
Join Date: Dec 2004
Location: north carolina
Posts: 82
.308 SubSonic Load Help

I have a Remington 700 with a suppresor and Gen III nightscope and I have ordered from two different companies a box of 220 grains that were supposed to be subsonic, but neither were. The noise level was about like a .17HMR Does anybody know a reloading recipe for a .308 that does not involve a filler that would clog up the baffles. Thanks
Reply With Quote
  •   #2  
    Unread 08-15-2005, 04:04 AM
    Junior Member
     
    Join Date: Jan 2004
    Location: Georgia
    Posts: 9
    Re: .308 SubSonic Load Help

    Go to the forum section here. http://www.silencertests.com/
    They have some load data for subsonic .308.
    Also this site has many pages of data on silencers and subsonic load data. http://guns.connect.fi/gow/QA1.html
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: .308 SubSonic Load Help
    Thread Thread Starter Forum Replies Last Post
    Subsonic bad? shaneman153d Rifles, Bullets, Barrels & Ballistics 17 08-12-2012 06:53 PM
    subsonic loads HawkeyeFan Rifles, Bullets, Barrels & Ballistics 5 08-13-2010 03:57 PM
    Subsonic 270 loads ? jmason Reloading 8 11-10-2009 07:31 AM
    Anyone have a good subsonic load for 308 Win? Shawn Carlock Reloading 8 08-28-2007 07:13 AM
    Subsonic 308W PawelM Reloading 3 12-07-2005 08:58 AM


    All times are GMT -5. The time now is 10:13 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC