Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


308 short barreled data question

LinkBack Thread Tools Display Modes
Unread 04-03-2013, 03:55 PM
Silver Member
Join Date: Apr 2010
Posts: 118
308 short barreled data question

Heres the situation. Last deer season I had to take my custom GAP rifle in 338 RUM with a 26 in bull barrel hunting for deer in Wisconsin. Some may say overkill, however sometimes it is neccessary to smash a bug with a sledge hammer. Anyway, as you can imagine it was very cumbersome and difficult to maintain an exceptable amount of silence. So, this year I'm buying a Rem 700 in 308 with a 16.5 barrel. I've owned a 26 inch rem 700 in 308 and have the figures from that. But using that as a baseline would do no good because every barrel, chamber, etc... is different. I'm curious if anyone has any hard velocity data on a 16.5 in barrel from a BOLT ACTION. I am NOT interested in semi auto velocities and please don't waste time posting velocities from two different firearms with varying barrel lengths. I've seen this done on many forums already and it proves nothing except for the general consensus that a shorter barrel will generally produce slower velocity. Lets compare apples to apples. Has anyone taken a 308 and cut the barrel back that far and tested velocities with the same load???
Reply With Quote



Thread Tools
Display Modes

All times are GMT -5. The time now is 05:19 AM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC