close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

.308 factory loads

LinkBack Thread Tools Display Modes
  #1  
Unread 01-27-2010, 04:07 PM
Junior Member
 
Join Date: Oct 2009
Posts: 7
.308 factory loads

What is your favorite .308 factory load. How does it perform on deer
Reply With Quote
  •   #2  
    Unread 01-27-2010, 04:23 PM
    Gold Member
     
    Join Date: Aug 2009
    Location: Cheyenne
    Posts: 514
    Re: .308 factory loads

    Winchester Supreme 150gr Ballistic Silvertip. It's done very well for me on whitetail at 20 yards to antelope at 215. None went more than two steps.
    Reply With Quote

      #3  
    Unread 01-27-2010, 05:14 PM
    Platinum Member
     
    Join Date: Dec 2001
    Location: Long Island, New York
    Posts: 2,457
    Re: .308 factory loads

    I've been shooting the 165gr Accubond at 2,700 ft/sec with good results. Deer hit @ 300+ yards died quickly. All shots were pass throughs. The bonded bulleyts performed reliably, although a Ballistic Tip may have worked just as well.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: .308 factory loads
    Thread Thread Starter Forum Replies Last Post
    Factory Loads alloutsmith3 Rifles, Bullets, Barrels & Ballistics 1 02-10-2011 02:52 PM
    Factory loads rtabor The Basics, Starting Out 11 08-07-2010 03:42 PM
    Factory loads deserthntr Reloading 14 06-16-2010 02:29 PM
    Factory Loads For 22-250 Micheal326 Rifles, Bullets, Barrels & Ballistics 1 08-28-2008 06:59 AM
    Best Factory .308 loads rice Rifles, Bullets, Barrels & Ballistics 6 08-13-2004 07:10 AM


    All times are GMT -5. The time now is 08:56 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC