Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

300RUM to a Tomahawk?

 
LinkBack Thread Tools Display Modes
  #8  
Old 01-21-2011, 12:03 AM
Gold Member
 
Join Date: Sep 2010
Location: Coldwater michigan
Posts: 507
Re: 300RUM to a Tomahawk?

LT LR


I found that statement from an older thread at the bottom of the page under the thread tomahawk. It was posted by ( daveosok ), post #7. Witch states.......using a 34" barrel 100gr h-1000 was getting 3600fps with the Berger 190's. It does seem
a little far fetched to me also. I just wanted some clarification as to starting this thread to those numbers too. I have been reading your post's for some time now and happen to put alot of value to your facts and opinions and have learned so much from what you and others have to say here, and am gratefull. Thanks for your input, it is helpfull.
Reply With Quote
  #9  
Old 01-21-2011, 11:35 AM
Platinum Member
 
Join Date: Mar 2002
Location: Wyoming
Posts: 2,615
Re: 300RUM to a Tomahawk?

I didn't know you were talking a 34" barrel. I thought we were talking normal barrel lengths. The 300 RUM is very accurate and very consistent with top velocities from what I saw on my range. So you can predict this one with fair accuracy. Looking at some of my data out of several 28" barrels they run consistent with top velocities around 3340 fps with the 190 grain bullet. With six more inches barrel length giving it 30 fps per inch makes it 3520 fps. Could improving it make it 3600 fps, maybe. Figure he could have had a hot load and a fast barrel and yes with a 34" barrel it could be possible. I guess from now on I need to ask rifle description before I answer. I always just assume a normal rig unless somebody specifies differently.
__________________
Predictions are difficult, especially when they involve the future
Reply With Quote
  #10  
Old 01-22-2011, 01:43 AM
Gold Member
 
Join Date: Sep 2010
Location: Coldwater michigan
Posts: 507
Re: 300RUM to a Tomahawk?

Not to worry, nbd. I didn't catch that at first either as to what length they were using. I also read on a similar thread of the exact same load combo and velocities. As for me, I think I can be just as satisfied with what the standard RUM load can through out.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 300RUM to a Tomahawk?
Thread Thread Starter Forum Replies Last Post
300 Tomahawk remingtonman_25_06 Rifles, Bullets, Barrels and Ballistics 20 11-25-2005 08:26 AM
7mm rum imp or Tomahawk? bwalker Rifles, Bullets, Barrels and Ballistics 1 01-07-2004 01:52 PM
300 Tomahawk larryaguilar Rifles, Bullets, Barrels and Ballistics 6 11-18-2003 12:14 AM
.300 Tomahawk Agunner012 The Basics, Starting Out 4 07-30-2003 05:37 AM
.338 Tomahawk,What is it?... smack Long Range Hunting & Shooting 2 03-20-2002 06:47 PM

Current Poll
Spot & Stalk or Ambush For Western Deer?
MOSTLY - Spot & Stalk - 73.65%
1,006 Vote
MOSTLY - Ambush - 26.35%
360 Votes
Total Votes: 1,366
You may not vote on this poll.

All times are GMT -5. The time now is 05:38 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC