close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

300 wsm loads

LinkBack Thread Tools Display Modes
  #1  
Unread 12-19-2011, 01:56 AM
Junior Member
 
Join Date: Jul 2010
Posts: 9
300 wsm loads

I have remington model 700 in 300 wsm with 26 inch flutted barrel, i am looking for some load data on this gun using berger, or nosler accubond any info would be greatly appreciated....thank danny.
Reply With Quote
  •   #2  
    Unread 12-19-2011, 06:02 AM
    Platinum Member
     
    Join Date: Jun 2007
    Location: Wilmington NC
    Posts: 4,751
    Re: 300 wsm loads

    Every gun is different but here is some info

    F210 primers
    H4350, MRP, RL17
    any of the bullets you listed
    Reply With Quote

      #3  
    Unread 12-19-2011, 06:09 AM
    Platinum Member
     
    Join Date: Oct 2005
    Location: Michigan
    Posts: 2,232
    Re: 300 wsm loads

    I've had good luck with H4350 for 180gr and heavier bullets. For 165gr and lighter, Varget is very good.

    I use CCI BR2 primers for the 300WSM.

    AJ
    __________________
    If some is good and more is better, then too much is just right.


    My mind is a raging torrent, flooded with rivulets of thought, cascading into a waterfall of creative alternatives
    Reply With Quote
      #4  
    Unread 12-19-2011, 11:36 AM
    Silver Member
     
    Join Date: Feb 2008
    Location: Memphis Tn
    Posts: 417
    Re: 300 wsm loads

    I have started working up loads for my 300WSM using 190 VLD's and the 185 Match Bergers. I have not yet settled on the best load but I am having some luck using N165 and IMR-7828 powders and either of these two bullets. With 69.0 grains on N165 in Norma cases and WLRM primers I am getting just short of 2900 ft/sec. with the 190 VLD's. With IMR-7828 I am getting just over 2900 ft/sec (2905) using Norma cases and WLRM primers, and 68.0 grains. As stated I have not settled on the load yet, so if you want to try these loads work up to them. With a stock Model 70 Winchester I am getting .5 inch three shot groups at 100 yards.
    Reply With Quote
      #5  
    Unread 12-19-2011, 02:20 PM
    Gold Member
     
    Join Date: Jun 2011
    Location: Kentucky
    Posts: 699
    Re: 300 wsm loads

    Anyone playing with the 200gr TTSX in their 300wsm?? Thinking I can get close to 2850fps??
    __________________
    Life is Short; Live, love, Hunt
    270 Winchester.......Jack had it right
    Reply With Quote
      #6  
    Unread 12-19-2011, 05:39 PM
    Silver Member
     
    Join Date: Jun 2008
    Location: Texas
    Posts: 420
    Re: 300 wsm loads

    I've had good luck with:
    69.0grs of Reloader-22
    Win. Brass
    Win. large rifle magnum primers
    With any 165gr bullet I've tried.
    Reply With Quote
      #7  
    Unread 12-19-2011, 09:19 PM
    Junior Member
     
    Join Date: Jul 2010
    Posts: 9
    Re: 300 wsm loads

    where is a good oal to start with rl 22 ?
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 300 wsm loads
    Thread Thread Starter Forum Replies Last Post
    loads for .308 WIN sdhunterman Reloading 13 01-12-2007 10:45 AM
    7 mm STW Loads Blacktail Rifles, Bullets, Barrels & Ballistics 16 11-10-2006 10:18 PM
    300 RUM loads YZEATER Reloading 2 08-17-2006 12:19 PM
    338 rum loads? jax338 Reloading 8 08-08-2006 08:27 PM
    winter max loads vs summer max loads?????? 30-06 boy Rifles, Bullets, Barrels & Ballistics 3 04-01-2006 11:11 PM


    All times are GMT -5. The time now is 03:34 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC