Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


300 Win Mag brass

LinkBack Thread Tools Display Modes
Unread 10-07-2001, 12:01 PM
Silver Member
Join Date: Jul 2001
Location: Walla Walla, WA
Posts: 174
300 Win Mag brass

Which brand of brass do you all prefer? Why? What are the differences between Remington, Winchester, Norma, Federal etc? Which is softer, thereby not allowing as high a pressure? Which has the greatest capacity? I am planning on having my rifle rebarreled to 300 Win Mag and wonder which brand of brass I should use. Also I plan to have the chamber throated long so that I can utilize my 3.6" magazine. I hope to have it throated so that the bullet will be touching the lands at an overall cartridge length of about 3.5" instead of the normal 3.34". I expect this will allow a bit higher velocity. With a 26" barrel and the barrel throated long what velocity range should I expect with 180 and 200 grain bullets? I was getting 3000 fps with the moly-coated 200 Nosler in my old 24" standard 300 Win Mag which I know was faster than most. I do not plan to shoot moly bullets in this new barrel. Thanks, Rufous.
Reply With Quote

Unread 10-07-2001, 07:21 PM
Silver Member
Join Date: May 2001
Location: Australia
Posts: 219
Re: 300 Win Mag brass

Of those you list, Norma is very weak and prone to expanding in the case head at pressures that other cases would stand. It is a shame as Norma is otherwise excellent brass. In 300 Win I find the RWS to be excellent. Remington is not very consistent from the testing that I have seen. In other calibres I have found Win brass to be good, though there is plenty of room for improvement. I would only use Win brass if Lapua of RWS cases were not offered (and, no unfortunately Lapua does not offer 300 Win brass, or much else in belted magnum).

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 300 Win Mag brass
Thread Thread Starter Forum Replies Last Post
338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels & Ballistics 6 02-29-2012 11:43 PM
Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM

All times are GMT -5. The time now is 03:58 AM.

All content ©2010-2015 Long Range Hunting, LLC