Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

265 gr. Lapua/Edge data TSX needed

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-06-2010, 04:12 PM
Bronze Member
 
Join Date: Mar 2006
Location: Southwest Oregon, Douglas County
Posts: 50
265 gr. Lapua/Edge data TSX needed

The brown truck just dropped off a package.
One of the items are 338 Lapua bullets (Barnes 265 gr.) TSX tipped, triple shocks, long and pointy.
I've been waiting on the Bergers like alot of guys, but these caught my eye.
I have an edge and a AI lapua and have just shot the 300 smks.

I am looking for load data I have H1000, retumbo, rl25, 869, 7828, 265gr. data needed.
Any load data would be great. Maybe some of you guys who have shot custom 265's may have some data.
Will post a picture if I can figure out how.
Slewfoot

Last edited by slewfoot; 03-06-2010 at 10:57 PM.
Reply With Quote
  #2  
Old 03-06-2010, 07:12 PM
Bronze Member
 
Join Date: Mar 2006
Location: Southwest Oregon, Douglas County
Posts: 50
Re: 265 gr. Lapua/Edge data TSX needed

post deleted

Last edited by slewfoot; 03-06-2010 at 10:34 PM.
Reply With Quote
  #3  
Old 03-06-2010, 10:24 PM
Bronze Member
 
Join Date: Mar 2006
Location: Southwest Oregon, Douglas County
Posts: 50
Re: 265 gr. Lapua/Edge data TSX needed



Left bullet is, of course the "go to" 300 gr. SMK.
Center bullet is Barnes 265 gr. tipped triple shock (338).
Right bullet is Barnes 140 gr. tipped triple shock 7mm for comparison.
I'd kind of like to know what the BC is for the 265 gr.
Thanks for any thoughts. Sorry for the lag in getting this photo up.
Slewfoot

Last edited by slewfoot; 03-06-2010 at 10:57 PM.
Reply With Quote
  #4  
Old 06-07-2010, 11:17 PM
XMC XMC is offline
Bronze Member
 
Join Date: Jun 2010
Posts: 92
Re: 265 gr. Lapua/Edge data TSX needed

Hey, just wondering if you had any luck with the 265 grain TTSX loads???
Same brown truck showed up here too so Iím on the same pathÖ normally just shooting 250 grain SMK with 88.5 grains of MagPro and getting one ragged hole with that but now Iím on a quest to take my 338 lapua to Co. with me this year elk hunting and give my 7mm rem mag a rest. Bought 200 of these 265 grain TTSX to play with to see if I can get them to perform. Iíll be starting with MagPro but any loads you have found to work well I would be greatly appreciative to hear aboutÖ
Reply With Quote
  #5  
Old 06-09-2010, 01:14 AM
Silver Member
 
Join Date: May 2007
Posts: 268
Re: 265 gr. Lapua/Edge data TSX needed

Barnes said the 265TTSX came in at .570
Reply With Quote
  #6  
Old 06-09-2010, 07:56 AM
XMC XMC is offline
Bronze Member
 
Join Date: Jun 2010
Posts: 92
Re: 265 gr. Lapua/Edge data TSX needed

Thanks X-Man,
Iím gonna have to call barnes back I guess; I called to talk to them pre-order and the rep told me .585, further reading in forums I saw .575 and now I see they have told you .570.
All are close but I would like them to land on one answer for this as it is an input for my BORS once I can find a pet load of (powder type / grains) to work with these little blue tipped monsters.
Have you had any luck developing a load for it?
Reply With Quote
  #7  
Old 06-09-2010, 01:45 PM
Silver Member
 
Join Date: May 2007
Posts: 268
Re: 265 gr. Lapua/Edge data TSX needed

Sorry fo the confusion.
Ty at Barnes said .575

I bought 20 boxes after being told .600-.610......

I just got the bullets the other day so no load yet...
Running 338Edge and 338Lapua so we should compare notes.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 265 gr. Lapua/Edge data TSX needed
Thread Thread Starter Forum Replies Last Post
338 Edge load data needed. Stevewix Reloading 14 01-06-2013 02:43 AM
Reload data needed dave1 Reloading 6 05-02-2009 11:19 AM
Loading data needed GOING FOR 2500 Reloading 0 01-07-2009 09:12 AM
Load Data Needed Jim Hundley Reloading 5 08-13-2006 08:33 AM
Data needed Rifles, Bullets, Barrels & Ballistics 3 03-07-2002 06:18 PM


All times are GMT -5. The time now is 02:07 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC