Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


25-06 twist question.

LinkBack Thread Tools Display Modes
Unread 06-01-2006, 09:07 AM
Silver Member
Join Date: Dec 2004
Location: Wis.
Posts: 150
Re: 25-06 twist question.

Can i use my lee collet die to neck size 25-06 AI?

[/ QUOTE ]

My 25-06 is not an AI, but I have the Lee Collets in many calibers and can't see why you couldn't make it work.

Just thinking "out loud" here, but you can lathe the bottom of the collet off to get the casing up into the die if needed. To go the other way you drop washers or a spacer made on a lathe (like I did) over the case as it sits in the shell holder. The latter is what I do to reloads that I only want to resize a portion of the neck.

Reply With Quote



Thread Tools
Display Modes

Similar Threads for: 25-06 twist question.
Thread Thread Starter Forum Replies Last Post
7mm-08 Twist Question RedRaider General Discussion 1 02-27-2011 09:44 AM
Question on 1 in 9 twist in .223 Strokerace_dave Rifles, Bullets, Barrels & Ballistics 3 06-19-2009 11:46 AM
Twist question Ksmirk Gunsmithing 2 07-31-2008 08:34 PM
Twist question? SamSpade Rifles, Bullets, Barrels & Ballistics 11 06-04-2006 06:49 PM
Twist Question dakor Rifles, Bullets, Barrels & Ballistics 7 09-20-2004 07:13 PM

All times are GMT -5. The time now is 01:58 PM.

All content ©2010-2015 Long Range Hunting, LLC