Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


.243 fusion Factory showing high pressure

LinkBack Thread Tools Display Modes
Unread 06-17-2011, 03:37 PM
Gold Member
Join Date: Jul 2002
Location: Wyoming
Posts: 710
.243 fusion Factory showing high pressure

new factory box today at the range, shot in my R25 .243, high pressure signs

"Opening Minds Worldwide"
Reply With Quote

Unread 06-18-2011, 06:34 PM
Platinum Member
Join Date: Aug 2003
Location: NC, oceanfront
Posts: 3,657
Re: .243 fusion Factory showing high pressure

I don't see any high pressure signs really.
The primers have not even begun to flaten. There are ejector marks, but no casehead wiping.
Was the brass difficult to extract?

Just looks to me like a sloppy firing pin bolt fit, and headspacing issues expectable with factory ammo..
Reply With Quote
Unread 06-19-2011, 12:48 PM
Junior Member
Join Date: Oct 2008
Posts: 9
Re: .243 fusion Factory showing high pressure

look at the ejector hole marks!
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: .243 fusion Factory showing high pressure
Thread Thread Starter Forum Replies Last Post
Factory Amom high pressure sings 400bull Rifles, Bullets, Barrels & Ballistics 7 11-19-2010 09:16 PM
Pet load showing sudden pressure?! drenge Reloading 13 09-09-2010 01:08 PM
High Pressure Flush System/High Speed Chambering Class Rustystud Gunsmithing 11 12-22-2009 11:26 AM
Showing signs of excess pressure/what next? goose Reloading 7 12-28-2008 09:19 AM
brass showing pressure signs at lower powder charges with subseqent firings jmden Rifles, Bullets, Barrels & Ballistics 3 05-02-2004 02:50 PM

All times are GMT -5. The time now is 01:44 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC