Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

200 grain Cutting Edge Bullets

 
LinkBack Thread Tools Display Modes
  #8  
Old 03-14-2013, 12:02 PM
RTK RTK is offline
Silver Member
 
Join Date: May 2012
Location: Left coast, kalifornia
Posts: 330
Re: 200 grain Cutting Edge Bullets

Is there no pressure band on those CE's
Reply With Quote
  #9  
Old 03-14-2013, 12:12 PM
Platinum Member
 
Join Date: Feb 2010
Location: Gillette, WY
Posts: 2,560
Re: 200 grain Cutting Edge Bullets

Quote:
Originally Posted by RTK View Post
Is there no pressure band on those CE's

Are you talking about the SealTite Band? (B) I'm sure it's there, just inside the case neck.
Attached Thumbnails - Click to View Larger
200 grain Cutting Edge Bullets-ceb-bullet-design.png  
__________________
"I, however, view ethics as an individual decision. My ethics are mine - and I won't explain or justify them to anyone else. I seek nobody's approval, just that of my own conscience. "

Reply With Quote
  #10  
Old 03-14-2013, 12:27 PM
Silver Member
 
Join Date: Feb 2013
Location: SW Alaska
Posts: 130
Re: 200 grain Cutting Edge Bullets

Correct Outlaw6.0, seal tite band is inside the case neck, but you can see the driving band in the photo if you look careful. If I seated to cutting edge's recommended seating depth I would be jammed .080" or so.

Reuben
__________________
Confucius say, "He who go to bed with itchy butt, wake up to smelly finga."
Reply With Quote
  #11  
Old 03-14-2013, 12:29 PM
RTK RTK is offline
Silver Member
 
Join Date: May 2012
Location: Left coast, kalifornia
Posts: 330
Re: 200 grain Cutting Edge Bullets

Forgot the exact terminology, I use them too in a different caliber and have never seated them so deep as to not see it. I would assume it would bulge the neck a little
Reply With Quote
  #12  
Old 03-14-2013, 12:35 PM
Silver Member
 
Join Date: Feb 2013
Location: SW Alaska
Posts: 130
Re: 200 grain Cutting Edge Bullets

Yes it does but only just slightly. I made sure to check that especially with the tight neck chamber. I neck turn to .334" when loaded, but with the seal tite band in the neck it makes them .336" when loaded. Now to just look for a detachable mag box that allows 4" OAL and I will be set.

Reuben
__________________
Confucius say, "He who go to bed with itchy butt, wake up to smelly finga."
Reply With Quote
  #13  
Old 03-14-2013, 12:35 PM
Platinum Member
 
Join Date: Feb 2010
Location: Gillette, WY
Posts: 2,560
Re: 200 grain Cutting Edge Bullets

Quote:
Originally Posted by RTK View Post
Forgot the exact terminology, I use them too in a different caliber and have never seated them so deep as to not see it. I would assume it would bulge the neck a little

I understand your thought. CE states there is nothing wrong with it though... LTLR did it quite a bit, I just took ownership of a box of 6.5mm 140grn CEB's that are only .100 shorter than these .308 200's!! I would imagine i'll be seating the sealtite band inside the case neck too


T
__________________
"I, however, view ethics as an individual decision. My ethics are mine - and I won't explain or justify them to anyone else. I seek nobody's approval, just that of my own conscience. "

Reply With Quote
  #14  
Old 03-14-2013, 12:46 PM
RTK RTK is offline
Silver Member
 
Join Date: May 2012
Location: Left coast, kalifornia
Posts: 330
Re: 200 grain Cutting Edge Bullets

Tell ya one thing, they are shooters in my gun, aren't cheap but accccuuuurrate.
I haven't yet taken any game with them but others have said they work well...................
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Current Poll
Have You Ever Backpack Hunted?
YES - 62.41%
1,066 Vote
NO - 37.59%
642 Votes
Total Votes: 1,708
You may not vote on this poll.

All times are GMT -5. The time now is 11:04 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC