Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

160gr Matrix

 
LinkBack Thread Tools Display Modes
  #57  
Old 04-15-2013, 07:55 PM
Bronze Member
 
Join Date: Nov 2010
Location: Montana
Posts: 64
Re: 160gr Matrix

Shot an A.I. for years before I built the Sherman. I'll be anxious to see your results. What barrel do you have?.......Rich[/QUOTE]

My rifle is built on a Howa action with a 26 inch 8 twist Shilen Select Match.
Reply With Quote
  #58  
Old 04-15-2013, 08:09 PM
Silver Member
 
Join Date: Apr 2008
Location: Dillon Mt
Posts: 170
Re: 160gr Matrix

Quote:
Originally Posted by elkaholic View Post
.090" off bodes VERY well for my 6.5 SS. All kinds of room to load in a std. Remmy SA mag box!
I was thinking the exact same thing!

Is the length of the lead the same for both the original and the SS ?
Cliff
Reply With Quote
  #59  
Old 04-15-2013, 08:41 PM
Platinum Member
 
Join Date: Dec 2008
Location: Grantsville Utah
Posts: 3,484
Re: 160gr Matrix

Quote:
Originally Posted by CliffM View Post
I was thinking the exact same thing!

Is the length of the lead the same for both the original and the SS ?
Cliff
6.5 Sherman ...................throat .160"

6.5 Sherman Shortmag ....throat .175"
Reply With Quote
  #60  
Old 04-15-2013, 10:36 PM
Platinum Member
 
Join Date: May 2008
Location: South of Canada and North of Wyoming
Posts: 5,953
Re: 160gr Matrix

What is the bearing surface of the 160's? I only have about .430" of neck and throat.
__________________
- Mark

You will never know how much it has cost my generation to preserve your freedom. I hope you make good use of it.
~ John Quincy Adams
Reply With Quote
  #61  
Old 04-15-2013, 10:43 PM
Platinum Member
 
Join Date: Dec 2008
Location: Grantsville Utah
Posts: 3,484
Re: 160gr Matrix

Quote:
Originally Posted by MontanaRifleman View Post
What is the bearing surface of the 160's? I only have about .430" of neck and throat.
Approx. (.660").....Rich
Reply With Quote
  #62  
Old 04-15-2013, 10:46 PM
Platinum Member
 
Join Date: Dec 2008
Location: Grantsville Utah
Posts: 3,484
Re: 160gr Matrix

Quote:
Originally Posted by MontanaRifleman View Post
What is the bearing surface of the 160's? I only have about .430" of neck and throat.
Approx. .550-.560".......Rich
Reply With Quote
  #63  
Old 04-15-2013, 11:33 PM
Silver Member
 
Join Date: Apr 2008
Location: Dillon Mt
Posts: 170
Re: 160gr Matrix

Rich ,
If I figured it right your COAL would be 2.895" and .090" short would be 2.805". Isn't that the max length for many of the short action magazines
Cliff
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 01:31 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC