close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

11 deg. crowning tool

LinkBack Thread Tools Display Modes
  #1  
Unread 05-03-2005, 01:28 PM
Platinum Member
 
Join Date: Dec 2001
Location: Potters Hill, NC
Posts: 1,688
11 deg. crowning tool

Does anyone know where a 11 deg. hand crowning tool can be gotten at. I've tried doing searches for Pacific Tool and Gauge and Klymer Reamers. No luck so far. Thanks. JK.
__________________
"The only thing necessay for the triumph of evil is for good men to do nothing."
Reply With Quote
  •   #2  
    Unread 05-03-2005, 01:43 PM
    Official LRH Sponsor
     
    Join Date: Jun 2004
    Location: Fort Shaw, Montana
    Posts: 6,841
    Re: 11 deg. crowning tool

    Go to MidwayUSA as they carry most of the PTG tooling and generally it is in stock for shipping.

    www.midwayusa.com

    Good SHooting!!

    Kirby Allen(50)
    __________________
    Kirby Allen(50)

    Allen Precision Shooting
    Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

    Farther, Faster and Flatter then ever before.

    Web Page: www.apsrifles.com

    allenmagnum@gmail.com
    Reply With Quote

      #3  
    Unread 05-03-2005, 01:50 PM
    Silver Member
     
    Join Date: Aug 2003
    Posts: 126
    Re: 11 deg. crowning tool

    Pacific (Kiff) has them, they are under Gunsmithing tools. www.pacifictoolandgauge.com
    Brownells also has them (I think they call it a 79-degree crown cutter)
    Check on the max barrel thickness for any cutter you order. I heard that Brownells is only 3/4"
    Reply With Quote
      #4  
    Unread 05-03-2005, 01:58 PM
    Platinum Member
     
    Join Date: Dec 2001
    Location: Potters Hill, NC
    Posts: 1,688
    Re: 11 deg. crowning tool

    Kirby,
    Thanks. I just found something on Brownell's website. Part # 080-586-750 (3/4" 79deg crown cutter). What is/are your procedure for cutting an 11 deg crown? Johnny K.
    __________________
    "The only thing necessay for the triumph of evil is for good men to do nothing."
    Reply With Quote
      #5  
    Unread 05-03-2005, 02:07 PM
    Platinum Member
     
    Join Date: Dec 2001
    Location: Potters Hill, NC
    Posts: 1,688
    Re: 11 deg. crowning tool

    Thanks Rich. I was spelling gauge as guage, duh.
    __________________
    "The only thing necessay for the triumph of evil is for good men to do nothing."
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 11 deg. crowning tool
    Thread Thread Starter Forum Replies Last Post
    Crowning Options? BigDaddyKane Rifles, Bullets, Barrels & Ballistics 6 05-09-2011 12:06 PM
    Threading and crowning with a steady zoeper Gunsmithing 3 07-10-2010 02:16 PM
    !!!First Crowning Job!!!! bigngreen Gunsmithing 13 07-10-2010 09:25 AM
    Reloading Tool & Accessory Tool box Chas1 Equipment Discussions 9 01-18-2010 04:30 PM
    Barrel Re-Crowning Question blong Rifles, Bullets, Barrels & Ballistics 5 01-27-2005 03:02 PM


    All times are GMT -5. The time now is 01:08 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC