Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Reply

Sighting In a Leupold

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-15-2006, 11:51 AM
Junior Member
 
Join Date: Feb 2006
Posts: 11
Sighting In a Leupold

Hello again Fella's,

I just bought a Leupold VX II 6-18X40mm AO and I have some questions about it. All I've ever owned were cheap tasco's that didn't have any adjustment to them at all. I've been reading where you guys discuss sighting in at 100 yards and then "dialing up" to another distance to shoot. I'm shooting at prarie dogs and sighted my gun in at 200 yards last Sunday. When I shoot at anything now around 100 yards I'm a little high and when I'm shooting at around 300 yards I'm a little low. Of course, a little high and a little low make a big difference with these little varmints. What can I do to get better accuracy from this scope? Can I set the scope at a certain range, say 100 yards, and then "dial up" when shooting at 200, 300, or even 400 yards? Any help would be welcome. I sure appreciate all of you hunters out there getting me started.

dasslp
Reply With Quote
  #2  
Old 02-15-2006, 01:49 PM
Junior Member
 
Join Date: Feb 2006
Posts: 15
Re: Sighting In a Leupold

Well the first step is to examine your load and then see what the bullet is doing at the various yardages. Next you sight in at, say 100 yards and then, from your ballistic info, you make the elevation adjustments to your scope.

For example, if you determine based on your load, that when you sight in at 100 yards you are say 9" low at 300 yards you just dial up the appropriate clicks. Remember 1 MOA is 1" at 100 yards and 3" at 300.

But before that, you need to be certain of your EXACT range. If you don't have a rangefinder I would sight in for a max PBR for the game you're shooting.

If you're interested I can suggest a ballistic program.
Reply With Quote
  #3  
Old 02-15-2006, 02:42 PM
POP POP is offline
Platinum Member
 
Join Date: Jul 2001
Location: CHEYENNE, WY
Posts: 1,373
Re: Sighting In a Leupold

http://www.eskimo.com/~jbm/calculati...culations.html
__________________
"Weatherby was too long so I nicknamed it "Bee""
Reply With Quote
  #4  
Old 02-15-2006, 11:34 PM
Platinum Member
 
Join Date: Jun 2003
Location: Hermiston, Oregon
Posts: 2,008
Re: Sighting In a Leupold

I know exactly what you mean. It is a problem. I found that if you sight dead on at 200, it helps a little bit. If you are in a hurry like I am when you jump out and see a yote at say 300 and you dont have time to range, I usually shoot low. With a 100yd zero, its wayyyy low and you dont have time to make adjusted clicks or get the range. I solved this by going to a 200 yard zero. You still need to be pretty close to the range though. When you zero target knob scopes, its best to know the exact range, or you usually always shoot high or low. Just the way it is. When I see a running coyote, I always wished I had a regular set up.
Reply With Quote
  #5  
Old 02-16-2006, 12:46 AM
Platinum Member
 
Join Date: Jun 2007
Posts: 1,515
Re: Sighting In a Leupold

Daslp and Rem. Are you all familliar with zeroing your scope for a "point blank range"?

If you are I'll keep quiet. If not though it sounds like something you might be interested in.

Daslp, You are never going to escape gravity. No matter what distance you zero your scope for you will always be either high or low at another distance. Your VXII is not real easy to dial quickly. I would suggest using a Point blank range zero (PBR). This will get you out to around 250 yards with no dial cranking then for the longer shots where you have time you can dial in your drops for that range and shoot prairie dogs all day.

Rem
[ QUOTE ]
When I see a running coyote, I always wished I had a regular set up.

[/ QUOTE ]
Do you mean you wish you had a scope with or without knobs? Sounds like you could use a scope with a bullet drop compensator reticle.
__________________
GRAVITY. It's not just a good idea. It's the LAW!
Reply With Quote
  #6  
Old 02-16-2006, 02:40 AM
Platinum Member
 
Join Date: Jun 2003
Location: Hermiston, Oregon
Posts: 2,008
Re: Sighting In a Leupold

I am familiar with it, but with target knob scopes, I dont think thats the proper way to zero them. I've always heard of people sighting them dead on at 100, 200, or 300. My factorys dont allow for a tight enough group at 300 to trust my "dead on" capability, thus I use a 200 zero with my target knob scopes. Yes, when I say a regular set up, I mean just your basic 3-9 scope w/out knobs sighted 2.5" or 3" high at 100. This makes a running yote out to 0-350 dead meat with a center hold most the time. With a 200 zero, w/out knowing the exact range and having the time, I get frustrated pretty quickly, when you shoot way low or something along those lines. I dont like BDC scopes, you still need to know pretty close to the exact range, or you'll miss. I just dont like to miss [img]/ubbthreads/images/graemlins/laugh.gif[/img] My only complaint with target knob scopes is that there great for LR work where you have time to range the target exactly, but for coyotes where there running more then half the time, its hard to get readings, then click your scope, then they run again, you gotta range and click up again. Sometimes its just not possible. Coyotes dont stand there forever. And sometimes you just know you dont have time so you have to make an educated judgement distance and hope for the best with my 200 yard zero.
Reply With Quote
  #7  
Old 02-16-2006, 10:35 AM
Platinum Member
 
Join Date: Jun 2007
Posts: 1,515
Re: Sighting In a Leupold

Rem the problems you have with target knob scopes are the same ones you will have with regular scopes. They just give you the ability to adjust more quickly when you have the time.

As far as the PBR goes this is what you do. First you zero the rifle at 100 yards then with the help of a ballistic program or your known actual drops you determine what your PBR is for a certain size target. Lets say that target is a 4" target which will actually work out to about a 6" target if you include your groups size at 300 with factory loads. When you go to the field you crank in your scope for this range when you leave the house of get out of the truck. Lets say it is 246 yards. Then, using the ballistics program info, you know that you are going to hit meat out to 282 yards by aiming dead center. When you are done for the day crank back to your 100 yard home zero and put her away. You will just have to learn what a coyote looks like at around 282 yards (or whatever you Maximum point blank range (MPBR)works out to be.) I guarantee it will get you hitting dogs at longer ranges than a 200 yard zero because you will know what your outer limit will be instead of guessing.

We can also build on this idea for a very quick adjustment for the shots past your MPBR.

What is your muzzle velocity and Ballistic coefficient for your yote gun? I will crunch numbers for you and show you what I mean. [img]/ubbthreads/images/graemlins/cool.gif[/img]
__________________
GRAVITY. It's not just a good idea. It's the LAW!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Sighting In a Leupold
Thread Thread Starter Forum Replies Last Post
Sighting in My TC The Duke007 Muzzleloader Hunting 10 12-05-2010 02:34 AM
Help Sighting In Limbic Long Range Hunting & Shooting 3 10-15-2009 09:24 PM
Leupold Mark 4 8,5x50 mm ER/T Sighting-In Christian F. Long Range Hunting & Shooting 1 05-01-2009 01:50 PM
Sighting in the Leupold ballistic reticle gube204 Long Range Scopes and Other Optics 3 04-24-2007 03:28 PM
sighting in mr308 Long Range Scopes and Other Optics 7 07-24-2003 12:01 PM


All times are GMT -5. The time now is 01:39 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC