Side focus turret interferance

[fllefty]

I had a leupold Long range scope w/side parrallex adj installed on a LH 700 a couple yrs ago but I replaced it w/ a front AO. The reason I did that was because the empty would hit the side dial. My bolt has a sako ejector. Anybody know if I would have the same problem w/std rem bolt. Id like to go to a nightforce scope. Does a righty suffer the same problem. Thanks

[Stormrider]

I'm a lefty and I have never had that problem on any LH Remington rifle that I own or right hand that I've ever shot. I even had a LH Remington with a Sako ejector that didn't have that problem. I suspect that maybe whoever did the work might have put the ejector up a little too high on the bolt.

[fllefty]

Thanks stormrider. Makes sense, I wonder if I can correct the problem or replace the bolt?

[Stormrider]

Since the bolt had to be cut for the extractor I'm not optimistic that it can be corrected.

Replacement bolts are available from:

CUSTOM REM 700 BOLT by Superior Shooting Systems

http://www.pacifictoolandgauge.com/p.../remington.htm

There may be others out there too. I just did a quick Google search.

I don't have any experience with either.

[Outlaw6.0]

I'm also a lefty, all of my rifles are lefties as well. I have 4 Savages, 3 Remmys & 2 Rugers. all of them but 3 have side parallax adjustment, I've never experienced what you are describing, I have 1 Rem with a Sako (never again) & another Rem with the M-16, Ruger or course is CRF. No problems with them so I tend to agree with the above post that maybe there is a flaw in the Sako install or part?

If you switch bolts I HIGHLY recommend the PTG, they are awesome, the Rem w/ M-16 extractor is PTG, I'm very impressed... & at a good price too.