Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Reply

Ring Position

 
LinkBack Thread Tools Display Modes
  #1  
Old 07-27-2004, 06:01 PM
Bronze Member
 
Join Date: Jun 2003
Location: Texas
Posts: 57
Ring Position

I am mounting a leupold 8-25*40 on my savage 10FP with a Farrell base. My question is this. I can put the front ring all the way back against the adjustment housing, this leaves about 2.5 inches of tube open until the bell starts to open it up, or i can put the ring in the forward most cross slot which will only leave about .5-.75 inches of tube. Where is the best place for the front ring. Against the housing will help with recoil, but a 308 doesnt have much to begin with.
Thanks
Gene Cole III
Reply With Quote
  #2  
Old 07-27-2004, 06:49 PM
Gold Member
 
Join Date: May 2001
Location: Urich, MO
Posts: 838
Re: Ring Position

You want your rings as wide as you can get them as a general rule of thumb.
__________________
Chris Matthews
www.longshotriflesllc.com
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Ring Position
Thread Thread Starter Forum Replies Last Post
Prone position questions rtabor The Basics, Starting Out 3 08-10-2011 02:06 PM
PSE TAC 15i crank storage position Len Backus PSE TAC 15/15i Crossbow Hunting Forum 6 03-10-2011 12:22 AM
shooting hand position in prone position Frogman77 Long Range Hunting & Shooting 8 10-07-2009 11:46 AM
Shooting position Newbie The Basics, Starting Out 9 08-17-2004 11:08 PM
Shooting position longrangehunter Long Range Hunting & Shooting 22 05-02-2002 04:09 AM


All times are GMT -5. The time now is 09:50 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC