close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics

Reply

Problems with IOR 2.5-10 X 56.

LinkBack Thread Tools Display Modes
  #1  
Unread 10-21-2004, 08:41 PM
Junior Member
 
Join Date: Jul 2003
Posts: 5
Problems with IOR 2.5-10 X 56.

Hi!!

I bought a IOR scope 1.5-10X56 and set it up to my SAKO TRG with Sako optilock rings.

I cant screw the rear ringts tight because If I do that I canīt change power (2.5-10).

Does anyone have the same(similar) problems??
Is the problem because me???????????

Best regard.
wiktor
Reply With Quote
  •   #2  
    Unread 10-25-2004, 11:08 PM
    700 700 is offline
    Silver Member
     
    Join Date: Jun 2002
    Location: Ireland
    Posts: 138
    Re: Problems with IOR 2.5-10 X 56.

    Wiktor

    Measure the diameter of the tube. It might be oversized and not true 30mm.

    Rgds

    700
    Reply With Quote

      #3  
    Unread 10-28-2004, 09:31 PM
    Silver Member
     
    Join Date: Sep 2002
    Posts: 453
    Re: Problems with IOR 2.5-10 X 56.

    It's not one of the 35mm tube's is it?
    __________________
    You try to get closer to the target,..and I keep trying to get further away.
    Reply With Quote
      #4  
    Unread 10-30-2004, 02:22 PM
    Bronze Member
     
    Join Date: Oct 2003
    Location: Princeton, Ks.
    Posts: 62
    Re: Problems with IOR 2.5-10 X 56.

    wiktor,

    Your getting the cap screws to tight on the rear. Loosen them up a bit and you'll be good to go.

    The tolerences in the rear of the scope are very close. It's pretty easy to bind up the power adjustments.

    Let me know if you need anything.

    Jim
    Reply With Quote
      #5  
    Unread 10-31-2004, 12:00 AM
    Platinum Member
     
    Join Date: May 2001
    Location: Casper Wy
    Posts: 1,377
    Re: Problems with IOR 2.5-10 X 56.

    Had sorta the same problem when I used Warn rings on a 16x.If I tightened them at all the focus ring would not adjust.Used a different set of rings and problem didnt happen.
    Some rings are not designed to be tightened against each other rather they are torqued...Badgers and NF come to mind.
    __________________
    "Make everything as simple as possible, but not simpler." -Albert Einstein (1879-1955)
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Problems with IOR 2.5-10 X 56.
    Thread Thread Starter Forum Replies Last Post
    .338 win mag problems GermanXJ Rifles, Bullets, Barrels & Ballistics 8 01-16-2011 01:03 PM
    Die Problems?? gunaddict62791 Reloading 3 01-07-2011 06:23 PM
    Fn SPR mag problems Ian B Rifles, Bullets, Barrels & Ballistics 0 09-21-2010 12:51 AM
    300 RUM problems asfornea2 Reloading 6 01-05-2009 11:01 AM
    Bad problems poleok Member Introductions 0 09-16-2008 01:44 PM


    All times are GMT -5. The time now is 06:23 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC