Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Reply

The New Dead On Accurate (DOA) Reticle from Bushnell

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-08-2009, 11:05 AM
Gold Member
 
Join Date: Dec 2007
Location: NYC, NY
Posts: 916
The New Dead On Accurate (DOA) Reticle from Bushnell

The New Dead On Accurate (DOA) Reticle from Bushnell
Unleashed: the world’s most lethal long-range reticle and field-judging device in one.
Dramatically stretch your effective range and judge a buck’s trophy quality in record time. Extended yardage aiming points enable you to shoot with lethal precision out to 600 yards with a rifle (DOA 600) and 250 yards with a muzzleloader (DOA 250).
Both have Rack Bracket reference lines for sizing up whitetail and mule deer antlers.
It all adds up to a whole new level of drop-dead certainty and fewer excuses at the moment of truth.
Reply With Quote
  #2  
Old 01-08-2009, 01:33 PM
Silver Member
 
Join Date: Sep 2008
Location: Fort McMurray , Alberta , Canada
Posts: 274
Re: The New Dead On Accurate (DOA) Reticle from Bushnell

Post a picture of the reticle it sounds pretty cool
Reply With Quote
  #3  
Old 01-08-2009, 01:47 PM
Gold Member
 
Join Date: Dec 2007
Location: NYC, NY
Posts: 916
Re: The New Dead On Accurate (DOA) Reticle from Bushnell

What I posted is all the info that I received from my sales rep this morning. No image, no which scope info, no release date.
These Pre-SHOT Show info e-mails are limited in info, but has enough to insure that I make time for my sales rep.

Last edited by gr8fuldoug; 01-08-2009 at 02:06 PM.
Reply With Quote
  #4  
Old 01-13-2009, 03:28 PM
Gold Member
 
Join Date: Dec 2007
Location: NYC, NY
Posts: 916
Re: The New Dead On Accurate (DOA) Reticle from Bushnell

More Info From Bushnell:

GENERAL INSTRUCTIONS
The DOA reticle gives hunters a series of aiming points that correspond to various black powder and centerfire loads.
These aiming points, combined with our innovative Rack Bracket, allows hunters to expand their effective range
while also aiding in field judging whitetail or mule deer at extended distances. Bushnell would like to stress
that these tools are only as good as the time spent practicing with them. Nothing can replace
quality firing range time and becoming comfortable shooting at each of the prescribed yardages, while noting bullet
placement. It is imperative for the hunter to spend time at the range, gaining familiarity with the reticle and how
it works with their firearm and bullet load. Ballistic performance can vary depending upon a number of factors,
including barrel length, powder type, bullet type, and numerous weather/atmosphere related variables.
THE DOA 250 RETICLE – For Muzzleloaders
Scopes with the DOA 250 are designed to be sighted-in at 100 yds, with aiming points every 50 yds, out to 250
yds. The top of the reticle’s bottom post represent approximately 300 yds. The shooter can use either .45 or .50
cal ammunition, and either 100 grains or 150 grains of Triple 7 pellets. The ballistic chart provided below is an
abbreviated version of the more complete one available online at: Bushnell Outdoor Products

The scope must also be set to the proper magnification for the reticle’s ballistic feature to function properly. In the
case of a 3-9x 40mm scope, the power change ring must be set at 9x for the ballistic function and Rack Bracket
to work correctly.

How To Use the Reticle:
1. Sight in at 100 yds on any magnification setting
2. Determine distance to target. For the best accuracy in determining distance, utilize a Laser
Rangefinder.
3. Set the scope’s magnification to 9x (9 power).
4. Place the appropriate aiming point on the desired target. If the target was determined to be at 175 yds,
hold directly between the 150 yd aiming point and the 200 yd aiming point.
THE DOA 600 RETICLE – For Centerfire Rifles
Designed to be used with today’s most popular centerfire rifle cartridges, the DOA 600 reticle is intended to be
sighted in at 100 yards, and provides aiming points at every 100 yd increment, out to 600 yds. The user can
sight-in at 100 yds on any magnification setting, but for the ballistic reticle feature to function properly, the scope’s
magnification must be set to the correct power. The correct settings for the scopes that include the DOA reticle are
as follows:
If your scope is a:
3-9x40
4-12x40
2.5-16x42
4.5-30x50
Use this power setting:
9x
12x
16x
20x

How To Use the Reticle:
1. Sight in at 100 yds on any magnification setting
2. Determine distance to target. For the best accuracy in determining distance, utilize a Bushnell
Laser Rangefinder (Scout 1000 ARC, Legend 1200 ARC).
3. Set the magnification to the appropriate setting.
4. Place appropriate aiming point on the desired target. If the target is determined to be at 350 yds,
hold directly between the 300 yd aiming point and the 400 yd aiming point
The DOA 600 reticle will work with any of the following ammunition loads:
.223 Win 55 gr
.243 Win, 95 gr.
. 25-06 Rem 115 gr
.270 Win, 130 gr.
. 270 WSM, 150 gr.
.7mm Rem Mag, 150 gr.
This is only a partial list of the ammunition that the reticle is ballistically matched to. For a complete list of all
ammunition compatible with the DOA 600 reticle technology, please visit:
Bushnell Outdoor Products

HOW THE RACK BRACKET WORKS
In an effort to help hunters, Bushnell looked at issues that had confronted many of them in the field. Field judging
deer, especially via magnified view, can be exceedingly difficult. To help with the field judging of whitetails and
mule deer we have incorporated a series of lines that extend out from each aiming point. Each lines measures
24 inches at the respective distance. There will also be two “hash marks” on each line that measure 17 inches
between them. Why did we choose 24” and 17”? After extensive research it was determined that 24 inches represents
the average width of a mule deer’s ears and 17 inches was the average width of a whitetail’s ears. Given
proper time to judge an animal, a hunter can now get an estimate of rack width, and possibly even tine length.
Rack Bracket estimations are for reference only and may not be exact. Make note that it is the sole responsibility of
the hunter to make the final determination on any animal they decide to harvest. Please refer to your local
and/or state regulations regarding antler width standards for harvested animals. It is the
hunters responsibility to be knowledgeable of and abide by all game regulations.
The Rack Bracket System
Size him up and put him down with the Rack Bracket.
Based on scope set at highest
power. For example, a 3-9x
scope would need to be at
9x for Rack Bracket accuracy.
24" – All extended yardage
crosshairs measure 24," the
tip-to-tip distance between
an average mule deer’s ears.
Judgement – Use the 24" and
17" measurements to gauge the
buck’s width. If the ears fit,
you have an accurate
estimation of range.
17" – The hash marks on each
extended-yardage crosshair
indicate the distance between
an average whitetail’s ears.
1. Determine the distance to a whitetail or mule deer. For the most accurate distance measurement,
use a Bushnell Laser Rangefinder (for best results, a model with angle range compensation (ARC)
is recommended- for example, the Scout 1000 ARC, Legend 1200 ARC, etc).
2. Turn the scope’s power ring to the appropriate position.
3. If the distance matches one of the prescribed aiming points you can utilize the Rack Bracket to
gauge antler width.
Reply With Quote
  #5  
Old 01-13-2009, 03:56 PM
Silver Member
 
Join Date: Nov 2007
Posts: 122
Re: The New Dead On Accurate (DOA) Reticle from Bushnell

The link in the posting above has a security warning attached to it (as of this date). Apparently, this portion of Bushnell's site may have been compromised by hackers: Google Safe Browsing diagnostic page for www.bushnell.com/customer_service
Reply With Quote
  #6  
Old 01-13-2009, 09:05 PM
Platinum Member
 
Join Date: Dec 2008
Location: Great Falls, MT
Posts: 4,359
Re: The New Dead On Accurate (DOA) Reticle from Bushnell



Cabelas had a better one earlier this AM.

ADDED:

Scanned from Cabelas catalog.

__________________

I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



"I am always proud of my country!"

"Leadership Rule #2: Don't be an @zzhole." - Maj Gen Burton Field.

Last edited by FEENIX; 01-14-2009 at 07:48 PM.
Reply With Quote
  #7  
Old 01-15-2009, 09:12 AM
Platinum Member
 
Join Date: Jul 2007
Location: Arkansas (Home of Record)
Posts: 1,213
Re: The New Dead On Accurate (DOA) Reticle from Bushnell

The new 6500's have the tactical turrets as well.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: The New Dead On Accurate (DOA) Reticle from Bushnell
Thread Thread Starter Forum Replies Last Post
Bushnell DOA 600 Reticle jedavet Long Range Scopes and Other Optics 1 09-22-2013 03:08 AM
FS Bushnell Trophy AO 4-12x40 DOA reticle NEW scope 2guard Optics For Sale 0 02-08-2011 06:07 PM
Bushnell 4-12 3200 Elite Ballistic reticle? sscoyote Long Range Scopes and Other Optics 0 04-02-2010 07:51 AM
Bushnell Elite 4200 Ballistic Reticle heiner39 Long Range Scopes and Other Optics 4 09-15-2008 11:24 AM
Bushnell Elite etched reticle superlite17 Long Range Scopes and Other Optics 2 08-15-2005 04:54 PM

Current Poll
In the last 12 months, what was your longest rifle kill on big game?
0 to 200 yards - 25.96%
1,531 Vote
201 to 400 yards - 32.12%
1,894 Vote
401 to 600 yards - 23.08%
1,361 Vote
601 to 800 yards - 10.01%
590 Votes
801 to 1,000 yards - 3.92%
231 Votes
Over 1,000 yards - 4.92%
290 Votes
Total Votes: 5,897
You may not vote on this poll.

All times are GMT -5. The time now is 11:21 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC