close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics

Reply

Need A Standard 1-Piece Base - New Winchester Model 70

LinkBack Thread Tools Display Modes
  #1  
Unread 08-15-2011, 06:31 PM
Junior Member
 
Join Date: Jul 2007
Posts: 5
Need A Standard 1-Piece Base - New Winchester Model 70

Hey all,

I've been looking everywhere, for a standard single dovetail 1-piece base that will fit my rifle. It's a 2010 Winchester Model 70, in .308. I cannot find anything. If anyone has a lead on a company that makes a non-picatinny 1-piece base, I would love to hear it!

Thank you.
Reply With Quote
  •   #2  
    Unread 08-15-2011, 10:04 PM
    Silver Member
     
    Join Date: Mar 2010
    Location: Spring, TX
    Posts: 353
    Re: Need A Standard 1-Piece Base - New Winchester Model 70

    Leupold
    Reply With Quote

      #3  
    Unread 08-15-2011, 10:52 PM
    Junior Member
     
    Join Date: Jul 2007
    Posts: 5
    Re: Need A Standard 1-Piece Base - New Winchester Model 70

    That's what I thought, too. Number 51738 long range standard base. Unfortunately, Leupold says it won't fit.
    Reply With Quote
      #4  
    Unread 08-16-2011, 05:52 AM
    Gold Member
     
    Join Date: Feb 2003
    Location: Illinios
    Posts: 574
    Re: Need A Standard 1-Piece Base - New Winchester Model 70

    Did you give Brownells a try? I've got one up in the shop, but i would need the hole spacing on your rifle to confirm a match up.
    Reply With Quote
      #5  
    Unread 08-16-2011, 06:30 AM
    Gold Member
     
    Join Date: Feb 2003
    Location: Illinios
    Posts: 574
    Re: Need A Standard 1-Piece Base - New Winchester Model 70

    The base i have has 3 holes, 1 at the windage end and 2 up front. From the windage hole to the first hole on the dove tail end is 3& 13/16" ctr to ctr the dovetail holes are 7/8" ctr to ctr apart.
    Reply With Quote
      #6  
    Unread 08-16-2011, 06:35 PM
    Junior Member
     
    Join Date: Jul 2007
    Posts: 5
    Re: Need A Standard 1-Piece Base - New Winchester Model 70

    Thank you for the information, Gary. I can't find my calipers and I'm headed out until tomorrow. I'll get those measurements to you, as soon as possible.
    Reply With Quote
      #7  
    Unread 08-16-2011, 08:07 PM
    Platinum Member
     
    Join Date: Dec 2008
    Location: Great Falls, MT
    Posts: 9,249
    Re: Need A Standard 1-Piece Base - New Winchester Model 70

    Another option for your consideration is the DNZ ...

    Winchester model 70 : DNZ Game Reaper scope mounts golf cart locks, Game Reaper Quiver Keeper Lock a Cart
    __________________

    I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



    "I am always proud of my country!"

    "Leadership Rule #2: Don't be an ***hole." - Maj Gen Burton Field.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Need A Standard 1-Piece Base - New Winchester Model 70
    Thread Thread Starter Forum Replies Last Post
    WTS GG&G Accucam QD Standard Base twadsw01 Optics For Sale 5 10-17-2011 01:02 PM
    Leupold 2-Piece Standard Scope Base Savage 10/110 Round Rear TORCHRIDER Optics For Sale 1 04-11-2011 01:58 PM
    Standard Base vs elevated base? kc Gunsmithing 6 10-19-2010 09:15 PM
    One piece or two piece scope base? isptroop38 Long Range Scopes and Other Optics 5 04-03-2007 09:27 PM
    Wby MV 2 piece base osprey Equipment Discussions 6 01-15-2006 07:27 AM


    All times are GMT -5. The time now is 12:24 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC