Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Reply

Need some help with Tasco target scope

 
LinkBack Thread Tools Display Modes
  #1  
Old 12-12-2011, 11:28 PM
Junior Member
 
Join Date: Dec 2011
Posts: 21
Need some help with Tasco target scope

I bought this scope for my remington 788 (222) and it has the glove turrets on the scope (6-24x44) could someone explain how u lock in the scope at dead on at 100 yards and then use your turrets to raise the scope for longer distance shots, and then back down to dead on again , how do i know where dead on is again ?
Reply With Quote
  #2  
Old 12-13-2011, 12:03 AM
Silver Member
 
Join Date: Jul 2011
Location: S.E. Missouri
Posts: 225
Re: Need some help with Tasco target scope

You either have a "zero-stop" feature on the scope or:

you'll have to precisely mark it somehow....or

you'll have to be very careful in counting your clicks so that you can count them back to zero.

Others here with more LR experience may have better ideas. But that's about all I can tell ya.
Reply With Quote
  #3  
Old 12-13-2011, 06:17 AM
Junior Member
 
Join Date: Dec 2011
Posts: 21
Re: Need some help with Tasco target scope

It has 2 locking set screws in each turret knob for setting something or keeping the knobs on ....
Reply With Quote
  #4  
Old 12-13-2011, 09:07 AM
Silver Member
 
Join Date: Jul 2011
Location: S.E. Missouri
Posts: 225
Re: Need some help with Tasco target scope

Can you research the model number online?

I'm not familiar with the one you have, so all I could do is guess.....
Reply With Quote
  #5  
Old 12-13-2011, 09:27 AM
Silver Member
 
Join Date: Nov 2011
Location: Southwest Virginia
Posts: 122
Re: Need some help with Tasco target scope

To reset the zero, you back the set screws out until they're loose, then pick up the turret. Once clear of the gears you can turn the turret back to zero. Once accomplished you then just push it down and screw the allen screws back in. If i'm not wrong there are 3 set screws in each turret. Try not to lose them they are quite small.
__________________
Learning every day.
Reply With Quote
  #6  
Old 12-13-2011, 12:50 PM
Junior Member
 
Join Date: Dec 2011
Posts: 21
Re: Need some help with Tasco target scope

Thanks everyone for there help !!!! I called Tasco and he told me same thing 112Savage , take out set screws once you get it set and put it on zero , but it doesnt have a notch for starting place so i guess i can make one .... Thanks Again Guys
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Need some help with Tasco target scope
Thread Thread Starter Forum Replies Last Post
Tasco Scope Sarge Optics For Sale 1 09-30-2010 11:47 AM
Tasco 6-24x44 Target & Varmint MontanaRifleman Optics For Sale 4 04-10-2010 07:57 PM
F.S Tasco 12X-60x56mm target riflescope mil dot reticle 308 nate Optics For Sale 6 12-30-2009 11:16 AM
For Sale: Tasco 36X target scope, dot, 1/8 min knobs. smack Optics For Sale 0 05-26-2009 08:11 PM
WTS: Tasco World Class Plus 8X32X50mm Target Knobs Fine Duplex--Sold PF Deucer01 Guns For Sale 1 06-24-2004 07:27 PM

Current Poll
Do you watch outdoor shows live or by recording them?
Always recorded - 13.30%
110 Votes
Mostly recorded - 24.18%
200 Votes
Sometimes recorded - 14.51%
120 Votes
Rarely or never recorded - 48.00%
397 Votes
Total Votes: 827
You may not vote on this poll.

All times are GMT -5. The time now is 06:42 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC