I am trying to make a
mill
dot hold over chart for my 30-06 and ive looked through some post but i cant make any of it make sense
can
any one give my the calculations to find out witch dot to hold over? i want to shoot out to 500 yrds and i think mill dots should be fine for this.
Thanks Zach
i dont know whats going on with my computer but it akeing this post kinda screwy srry.
Just remember that 1 mil represents 3.6" at 100 yards.
So lets say that drops are:
300 yards = 7"
400 yards =22"
500 yards = 45"
For 300 yards 3.6 x 3 = 10.8 (this is what 1 mil represents at 300 yards) Now take your 7" of drop for 300 and divide it 10.8 and you come up with .648 mils for your hold over.
400 yards 3.6 x 4 = 14.4 (22 divided by 14.4) = 1.529 mil hold over
500 yards 3.6 x 5 = 18 (45 divided by 18) = 2.5 mil hold over
nate this will work for any caliber. If you have your drops just substitute them for the ones for the corresponding yardage. Do you have your drop chart?