Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Reply

Leica Rangemaster 1600-B Mil-Dot ?

 
LinkBack Thread Tools Display Modes
  #1  
Old 08-03-2013, 01:01 PM
Junior Member
 
Join Date: Nov 2011
Posts: 6
Leica Rangemaster 1600-B Mil-Dot ?

Hello , I'm new to Long range shooting but will the Leica 1600-B Using its ballistic program tell you which mil-dot too use for hold over and has anyone used it yet and how does it work ? Thanks
Reply With Quote
  #2  
Old 08-06-2013, 06:44 PM
Junior Member
 
Join Date: Nov 2011
Posts: 6
Re: Leica Rangemaster 1600-B Mil-Dot ?

Does anyone own a Leica 1600-B ?
Reply With Quote
  #3  
Old 08-06-2013, 07:27 PM
Platinum Member
 
Join Date: Jan 2008
Location: West Central Idaho
Posts: 1,133
Re: Leica Rangemaster 1600-B Mil-Dot ?

I use a 1600B but not the pre set ballistic curves. In the US set nothing was close enough to the load I use so just use the Lecia for ranging and degree of slope. Once you know the ballistic curve of the load you are using then you can see if any of the pre set EU curves fit close enough for you to use.
__________________
Jim



There is something about the outside of a horse that is good for the inside of a man. Sir Winston Churchill.

Everything that is really great and inspiring is created by the individual who can labor in freedom. Einstein
Reply With Quote
  #4  
Old 08-06-2013, 08:18 PM
Junior Member
 
Join Date: Nov 2011
Posts: 6
Re: Leica Rangemaster 1600-B Mil-Dot ?

Thanks for your reply . I was just wondering if i do use the ballistic that it has . Will it tell you in mil-dots what the hold over is . Like 2 1/2 mil-dots . ETC Thanks
Reply With Quote
  #5  
Old 08-10-2013, 05:12 PM
Junior Member
 
Join Date: Nov 2011
Posts: 6
Re: Leica Rangemaster 1600-B Mil-Dot ?

Can anyone else let me know about this ? thanks
Reply With Quote
  #6  
Old 08-10-2013, 06:45 PM
Platinum Member
 
Join Date: Jan 2008
Location: West Central Idaho
Posts: 1,133
Re: Leica Rangemaster 1600-B Mil-Dot ?

Quote:
Originally Posted by yyaassoo View Post
Thanks for your reply . I was just wondering if i do use the ballistic that it has . Will it tell you in mil-dots what the hold over is . Like 2 1/2 mil-dots . ETC Thanks
Basically the answer is no. If using the EU system the holdover is in centimeters. Using the US system the holdovers are in inches.
__________________
Jim



There is something about the outside of a horse that is good for the inside of a man. Sir Winston Churchill.

Everything that is really great and inspiring is created by the individual who can labor in freedom. Einstein
Reply With Quote
  #7  
Old 08-10-2013, 07:21 PM
Official LRH Sponsor
 
Join Date: May 2011
Location: Ventura CA
Posts: 873
Quote:
Originally Posted by kcebcj View Post

Basically the answer is no. If using the EU system the holdover is in centimeters. Using the US system the holdovers are in inches.
But isn't 1 cm@100 m = 0.1 mrad? That is in mildot units. What am I missing?
__________________

www.HighPowerOptics.com
Sports Optics
Rifle Scope Installation Tool Kits for Rent
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 01:44 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC