Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Leica 1600 Reticle

LinkBack Thread Tools Display Modes
Unread 06-24-2013, 09:54 PM
Silver Member
Join Date: Dec 2012
Posts: 227
Leica 1600 Reticle


I have been trying my new leica rangefinder. Yesterday, I had the opportunity to range some deer at around 600 yards. However, I was having trouble ranging the deer because the reticle was larger than the deer. I have read that some people use only a certain portion of the reticle to range small objects. So my question is, which portion of the reticle should I focus on when ranging deer? Should I place the deer in the center of the reticle? Should I use the top bar of the reticle to range it or should i use the lower bar of the reticle?

Any help is much appreciated.
Reply With Quote

Unread 06-24-2013, 11:00 PM
Platinum Member
Join Date: Jan 2008
Location: West Central Idaho
Posts: 1,183
Re: Leica 1600 Reticle

I have a new 1600B and am assuming the box reticle is the size of the beam at whatever distance you are looking at. Could be wrong about that as could find nothing addressing it. The farther out the more it covers. I think dead center is the spot you want the target to be unless there is a tree limb or something encroaching into the box. It will read the closest object as in the deer not the hill side behind it. That's my take on it.

There is something about the outside of a horse that is good for the inside of a man. Sir Winston Churchill.

Everything that is really great and inspiring is created by the individual who can labor in freedom. Einstein
Reply With Quote
Unread 06-25-2013, 09:55 AM
Silver Member
Join Date: Dec 2012
Posts: 227
Re: Leica 1600 Reticle

Anyone else?
Reply With Quote
Unread 06-25-2013, 11:22 AM
Gold Member
Join Date: Oct 2007
Location: Patagonia Mountains, Arizona
Posts: 764
Re: Leica 1600 Reticle

A way you can test the beam position shape, and orientation is to aim at a reflective road sign at a long distance (1500 yards ? ) and see where in the area of the reticle area you can and can't get a reading.

The aiming square is about 10 arcminutes (10 moa). (on my CRF 1600, not a B model)
The beam shape is roughly elliptical and is speced at 0.5 x 2.5 milliradians (mils) which is 1.7 x 8.6 moa. At long range the beam should be centered in the square. The laser is mounted 1-3/4" below the telescope so it will appear that low on the target. That shouldn't matter at over 100 yards.

I don't attempt to measure the distance to animals directly at long range. The hair on most animals is a poor reflector in the 800-1000 nm wavelength range. When possible I'll measure to a nearby tree, bush, or rock if I can determine that it's at the same distance as the animal.
Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 09:48 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC