close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics

Reply

Burris Signature Zee Rings - 10 MOA or 20 MOA?

LinkBack Thread Tools Display Modes
  #1  
Unread 11-05-2010, 07:54 AM
Gold Member
 
Join Date: Jul 2007
Posts: 715
Burris Signature Zee Rings - 10 MOA or 20 MOA?

I am preparing to mount a new Sightron scope to my Ken Farrel base using the high burris signature zee rings. Will I gain 10 MOA or 20 MOA using the included offset ring inserts? I plan to use the +10 insert on the bottom of the rear ring and the other +10 insert in the top of the forward ring. Thanks for your help.
Reply With Quote
  •   #2  
    Unread 11-05-2010, 09:31 AM
    Platinum Member
     
    Join Date: Mar 2003
    Location: Southern Wisconsin
    Posts: 1,381
    Re: Burris Signature Zee Rings - 10 MOA or 20 MOA?

    The inserts are designed to be used in sets. If you put a +10 in the bottom rear you'll need a -10 in the top rear, that and zeros in the front will get you about 10 moa.

    Add a +10 in the top front and -10 in the bottom front will get you an additional 10 moa for a total of 20 moa.

    Now keep in mind the inserts are in thousandths not MOA so depending on rings spacing the actual amount may vary a bit but it will generally be within a couple of moa. Most of mine have come up a little short, but not enough to matter.

    Chris
    __________________
    Ignorance can be treated with education, sadly there is no cure for stupidity.
    Reply With Quote

      #3  
    Unread 11-05-2010, 05:48 PM
    Platinum Member
     
    Join Date: Mar 2008
    Location: SW Idaho
    Posts: 1,315
    Re: Burris Signature Zee Rings - 10 MOA or 20 MOA?

    Quote:
    Originally Posted by winmagman View Post
    The inserts are designed to be used in sets. If you put a +10 in the bottom rear you'll need a -10 in the top rear, that and zeros in the front will get you about 10 moa.

    Add a +10 in the top front and -10 in the bottom front will get you an additional 10 moa for a total of 20 moa.

    Now keep in mind the inserts are in thousandths not MOA so depending on rings spacing the actual amount may vary a bit but it will generally be within a couple of moa. Most of mine have come up a little short, but not enough to matter.

    Chris
    Correct. Sometimes you don't get two sets of +- 10 inserts so you will need to buy the extra kit if you need the 20MOA
    Reply With Quote
      #4  
    Unread 11-09-2010, 07:20 AM
    Gold Member
     
    Join Date: Jul 2007
    Posts: 715
    Re: Burris Signature Zee Rings - 10 MOA or 20 MOA?

    Thanks for the help and advice.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Burris Signature Zee Rings - 10 MOA or 20 MOA?
    Thread Thread Starter Forum Replies Last Post
    Burris Signature 30mm and 1" Rings, Leupold rings, also some bases ***SOLD*** thechamp Optics For Sale 7 03-01-2012 11:38 PM
    wtb burris signature rings Solheim Optics For Sale 7 01-06-2012 05:13 PM
    Burris Signature Rings Lapua guy Long Range Scopes and Other Optics 2 02-04-2011 12:13 AM
    Burris Signature Zee Rings Carvera Optics For Sale 0 01-10-2009 07:01 PM
    Burris signature rings Happ571 Long Range Hunting & Shooting 3 09-16-2008 01:09 PM


    All times are GMT -5. The time now is 12:21 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC