Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Burris Eliminator III issue

LinkBack Thread Tools Display Modes
Unread 09-23-2013, 10:59 PM
Bronze Member
Join Date: Sep 2005
Location: MONTANA
Posts: 86
Burris Eliminator III issue

So I spoke to Burris today about my Eliminator III problem with windage traveling about an inch to the right after about 14 rounds of 300 RUM . They said that it possibly is slipping and that I should make note of my windage zero then to go clockwise untill it stops, than take it back the other direction untill it stops,do this a few times to work the grease in and hope that it helps settle or seat the adjustments. They said if that doesn't work then to send scope in.Does this sound like this could be a possibility? ?
Reply With Quote

Unread 09-24-2013, 06:23 PM
Bronze Member
Join Date: Mar 2013
Location: Dillwyn,VA
Posts: 68
Re: Burris Eliminator III issue

I have no experience with the Burris but I have herd that before you mount a scope you are supposed to run both elevation and windage turrets. I think I saw it on a episode of The Best of the West.
Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 09:05 AM.

All content ©2010-2015 Long Range Hunting, LLC