close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics

Reply

Badger Ordinance ring questions

LinkBack Thread Tools Display Modes
  #1  
Unread 05-17-2010, 02:49 PM
Bronze Member
 
Join Date: Jan 2010
Posts: 65
Badger Ordinance ring questions

I have a 20 moa rail on a Rem 700 that will be paired with a 30mm tube 50mm Obj Leupold. My question is what height rings do I need? And do you guys like the aluminum or regualar?

Thanks in advance.

JP
Reply With Quote
  •   #2  
    Unread 05-17-2010, 06:26 PM
    Bronze Member
     
    Join Date: May 2010
    Location: Australia.. The worlds largest Island
    Posts: 46
    Re: Badger Ordinance ring questions

    For a starters what Leupold are you getting?.. Mk4, VX-7, VX-3L ect.

    I have a set of Max 50 High for the 30 mil tube but will be changing that to the Max 50 Standard for the 30mil tube as I have a VX-3L 4.5-15x50 atop my rifle because the objective has the scallop/cut out allowing the scope to sit lower.

    So as you can see there are an almost endless combination to choose from and all depending on what Objective you are getting, IE, the Standard or Scallop/cut out.

    I have heard of good reports for the alloy rings from Badger and I may even get me a set of these in the future as well.
    Reply With Quote

      #3  
    Unread 05-17-2010, 08:28 PM
    Bronze Member
     
    Join Date: Jan 2010
    Posts: 65
    Re: Badger Ordinance ring questions

    it'll be the standard objective, not the vxl.
    vx3 6.5-20x50, 30mm tube, basically a rem varmint contour barrel.

    Last edited by jpeaston; 05-17-2010 at 08:53 PM.
    Reply With Quote
      #4  
    Unread 05-17-2010, 09:23 PM
    Gold Member
     
    Join Date: Jun 2006
    Location: Wyoming
    Posts: 530
    Re: Badger Ordinance ring questions

    .885 I don't remember if they're called standard or medium, but that is the height.
    __________________
    ΜΟΛΩΝ ΛΑΒΕ!

    http://www.coppercreekammo.com/

    You only live once. So spend 15 hours on the Internet everyday, desperately seeking validation from perfect strangers...

    "The Internet...the only place you can be what you want to without having to do it..." EHG
    Reply With Quote
      #5  
    Unread 05-17-2010, 11:41 PM
    Bronze Member
     
    Join Date: May 2010
    Location: Australia.. The worlds largest Island
    Posts: 46
    Re: Badger Ordinance ring questions

    Quote:
    Originally Posted by cinch View Post
    .885 I don't remember if they're called standard or medium, but that is the height.

    You have the number correct
    for the Max 50's
    Medium .885"
    Medium High 1.00"

    For the standard rings

    Standard Height
    Height 0.823, diameter 30mm

    Medium
    Height 0.885, diameter 30mm

    Good luck jpeaston with the final outcome it will look good.
    Reply With Quote
      #6  
    Unread 05-18-2010, 06:06 PM
    Official LRH Sponsor
     
    Join Date: Jun 2004
    Location: Sacramento
    Posts: 1,248
    Re: Badger Ordinance ring questions

    I really like the BADGER rings and bases. For a REM 700 w/ a 20moa base you can use Badger Standards 0.823 center height (this is what I use) but the most common for this setup is the 0.885. You can also use the Leupold Mark 4 rings and they are really good for the price. I also recommend alloy rings, the scope is alloy and you will not have to worry about the getting rust in between the scope and rings.

    Mike @ CST
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Badger Ordinance ring questions
    Thread Thread Starter Forum Replies Last Post
    WTS/WTT Badger ordinance rings midnightmalloy Optics For Sale 1 01-28-2011 02:54 AM
    FS: Badger Ordinance ACI coues7 Optics For Sale 1 04-05-2007 11:36 AM
    badger ordinance rings smack Guns For Sale 1 01-24-2004 12:57 AM
    Badger ring height for NXS MOA Long Range Scopes and Other Optics 2 05-31-2003 07:41 PM
    Badger Ordinance rings and bases Dave King Equipment Discussions 0 05-11-2001 08:38 AM


    All times are GMT -5. The time now is 07:03 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC