Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Long Range Scopes and Other Optics

Long Range Scopes and Other Optics Nightforce Optics


Reply

B&C Leupold Question

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-11-2013, 04:04 PM
SL3 SL3 is offline
Junior Member
 
Join Date: Jan 2013
Posts: 3
B&C Leupold Question

Ok Folks I’m new here. I have a question that I hope that at least one of you can answer. I have the Boon & Crocket Reticle on one of my hunting rifles and would simply like to know the power value of the smaller triangle on the scope. I am very familiar with the system and how it works, so that is not the question here. I only wish to know the value so I can use my own ballistic calculator to make some adjustments depending on the area I’m hunting (weather, altitude etc.). The larger triangle is 8X because it is stamped right there on the power selector ring like it should be. The next given value going down is 5X and then 4X and then 2.5X. The small triangle sits between the 5X and the 8X. I would guess it is 6X or 6.5X, but would like to be sure so I could use my own ballistic program to check it with. I called Leupold and even the guy helping me was perplexed when he could not seem to find an answer when searching through the engineering specifications. It amazes me that Leupold would give you the power value for the large triangle but not the smaller one. Does anyone know the answer to this?

Last edited by SL3; 01-11-2013 at 06:21 PM.
Reply With Quote
  #2  
Old 01-12-2013, 05:01 PM
Platinum Member
 
Join Date: Dec 2009
Location: NW MT
Posts: 2,648
Re: B&C Leupold Question

All I could find in my manual was listed drops when on small delta.With 200 zero.300=8.61,400=25.13,450=36.87,500=51.18.You can compare this to your ballistic program.
Reply With Quote
  #3  
Old 01-12-2013, 10:00 PM
Platinum Member
 
Join Date: Dec 2009
Location: Holland, MI
Posts: 1,629
Re: B&C Leupold Question

Look at your instruction book on page 7 and 8 (linked below).

The triangles are for large bullet drop vs small bullet drop (their words).


http://www.google.com/url?sa=t&rct=j...57700187,d.aWM
Reply With Quote
  #4  
Old 01-13-2013, 09:11 AM
Platinum Member
 
Join Date: Feb 2003
Location: Pueblo, CO
Posts: 1,182
Re: B&C Leupold Question

Take the large bullet drop and divide by the SBD of every value [from DV's link posted above], and that will give you the percentage of magnification change and avg. magnification change [by multiplying that value by 8 power] since subtension is inversely proportional to magnification. I've never quite trusted the magnification markings on the Leupold power rings though--since the range estimating systems are a bit off for power calculations. They're actually never perfect though since actual magnification and the marked magnification is not exact. The calcs are usually very close though...somehow.
Reply With Quote
  #5  
Old 01-13-2013, 06:02 PM
SL3 SL3 is offline
Junior Member
 
Join Date: Jan 2013
Posts: 3
Re: B&C Leupold Question

Thanks sscoyote I will try that. I also heard from a friend that Leupold fudges the numbers on their scopes in some sort of effort to make them seem clearer than their competitors, not sure if it's true but makes since. The same friend told me that there was some sort of chart that you can use to put your scope on to check the power. Have you ever heard of such a chart that when looking through your scope at a certain yardage you can compare the circle or some sort of symbol in the reticle to see what power your at. If so where can you get that chart?
Reply With Quote
  #6  
Old 01-14-2013, 08:29 AM
Platinum Member
 
Join Date: Feb 2003
Location: Pueblo, CO
Posts: 1,182
Re: B&C Leupold Question

I have heard of such a system for calculating actual magnification, but i don't know what it is, sorry sir! I have adjusted the magnification [and consequently subtension] on a buddies 2.5-8x VX-III [Duplex reticle], and the subtension did match the trajectory curve dead on the nose though. This using only an estimated [from factory spec actually] muzzle velocity.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 08:53 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC