Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics


Reply

Where to zero?

 
LinkBack Thread Tools Display Modes
  #1  
Old 08-01-2002, 10:30 PM
MOA MOA is offline
Bronze Member
 
Join Date: Nov 2001
Location: California
Posts: 92
Where to zero?

I will be receiving a LRF 1200 tomorrow. I sold my Bushnell 1000 when I heard how great they were. Now with hunting season approaching quickly I need to decided where to zero my scope. I'm shooting a 270 WSM and live out west where shots can be long. Right now I'm shooting a .433 BC bullet at 3300 (130 gr) and it's only about 2.5" high at one hundred with a 275 yard zero. I'm considering zeroing it at 100 to make the math straight forward for extended ranges. It's only 2 inches low at 200 yards so theoretically I can hold dead on out to at least 250, and anything further I'd want to range anyways. Can you guys offer some opinion on where to zero your rifle when using a range finder?
Reply With Quote
  #2  
Old 08-01-2002, 11:08 PM
Platinum Member
 
Join Date: May 2001
Location: Pennsylvania
Posts: 1,757
Re: Where to zero?

I presume your going to click your scope (from your drop chart) to any yardage range the rangefinder reads?

Zero it to 100 yards and make up your drop chart from that point.

No hold over in LR hunting. Either use a dot, or mill system or click to any yardage you intend to shoot.

I prefer to click aftyer I zero to 100 yards.

Darryl Cassel
__________________
Darryl Cassel
Reply With Quote
  #3  
Old 08-01-2002, 11:15 PM
MOA MOA is offline
Bronze Member
 
Join Date: Nov 2001
Location: California
Posts: 92
Re: Where to zero?

Thanks Darryl, That's what I'll do. I usually shoot a 338 RUM that is has a LR Leupold on it. This rifle has a Leu 4.5-14 by 40mm on it. I threw on some aftermarket target knobs and will give them a try.
Reply With Quote
  #4  
Old 08-02-2002, 10:12 AM
Writers Guild
 
Join Date: Jul 2001
Posts: 1,459
Re: Where to zero?

MOA, I am guessing your target knobs are by Stoney Point. They are only registered for one revolution which I believe is 12 MOA on your scope. After one revolution, you are on your own for remembering where you are.

Not a good setup for LR shooting where adjustments can exceed one revolution. If you have the time, send the scope back to Leupold and have a target turrent installed on the elevation knob. These knobs are great! Have a vernier type scale and clearly marked increments. Very nice adjustment for visual and feel. I think it costs $45.

You can leave the Stoney point on the windage. You will never need more then one revolution for wind. At a few MOA of adjustment, it is too windy to shoot at game LR.

Good luck...

Jerry
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Current Poll
How Many Different Cartridges Do You Reload For?
ZERO, all factory ammo - 7.98%
349 Votes
1 - 2.79%
122 Votes
2 or 3 - 14.55%
636 Votes
4 or 5 - 20.32%
888 Votes
6 or 7 - 14.89%
651 Votes
8 or 9 - 8.67%
379 Votes
10 or more - 30.79%
1,346 Vote
Total Votes: 4,371
You may not vote on this poll.

All times are GMT -5. The time now is 10:28 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC