Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics


Sendero questions

LinkBack Thread Tools Display Modes
Unread 10-06-2009, 12:19 PM
Bronze Member
Join Date: Sep 2009
Posts: 92
Sendero questions

Remington 300 Ultramag, model 700 Sendero SF, stainless fluted barrel... are these things much different then a standard model 700? what exactly am I getting from the sendero... and a fluted barrel?
Reply With Quote
  •   #2  
    Unread 10-06-2009, 12:37 PM
    Gold Member
    Join Date: Sep 2009
    Location: Malta NY
    Posts: 722
    Re: Sendero questions

    You get a Pillar bedded HS Sprecision stock. Value add there is you like the feel of the stock.
    “When a long train of abuses and usurpations, pursuing invariably the same object evinces a design to reduce them under absolute despotism, it is their right, it is their duty to throw off such governments. …” Jefferson

    We are very close to this point now.
    Reply With Quote

    Unread 10-06-2009, 06:25 PM
    Platinum Member
    Join Date: Jan 2005
    Location: OK
    Posts: 2,133
    Re: Sendero questions

    What your getting is a factory made barrel with a little more meat on it. and as was stated a HS stock. With a little luck and some "light gunsmithing" they can be very good shooters. Much of that relies on getting a good barrel out of the many ho-hum barrels that come out of Remington. With good handloads most Senderos will do under an inch, some not that well and a few will make one ragged hole at 100 yards.
    Reply With Quote
    Unread 10-06-2009, 07:54 PM
    ATH ATH is offline
    Gold Member
    Join Date: Oct 2003
    Location: Lizton, IN
    Posts: 774
    Re: Sendero questions

    You get about as good as you can without starting to put custom parts on.

    It's a good affordable way to get into LRH.....shoot the hell out of that factory barrel, both to improve your skills and to burn it out so you can rebarrel with something that doesn't foul and blow accuracy in 15 shots like a factory Remington does.
    Reply With Quote
    Unread 10-06-2009, 08:43 PM
    Junior Member
    Join Date: May 2009
    Posts: 15
    Re: Sendero questions

    Make sure that you like the feel of the stock first. I'm not overly enthused about mine, but is does the job just fine. Great guns though, if I do my part it shoots sub .5 moa with the factory barrel and hand loads.
    Reply With Quote
    Unread 10-07-2009, 12:08 AM
    Platinum Member
    Join Date: May 2008
    Location: South of Canada and North of Wyoming
    Posts: 6,068
    Re: Sendero questions

    I have two used ones and they are both sub 1/2 MOA. A 25-06 and a 300 RUM. One has a fired cracked bore but still drives tacks. Neither of thes rifles have a thing done to them. Met a guy at the range this morning who has a tack driving 700 RUM Sendero.

    I like the older SF's better than the newer SF II's.

    What does the fluted barrel give you? Well.... it looks cool and it gives you more stiffness per weight.

    They are a factory barrel, and mine (the 300 RUM which only had 20 rounds down the tube when I bought it) is/was a fouler. Been breaking it in and fouling has gone way down.

    They dont come with 1/2 MOA guarantees so you are taking a chance, but most shoot very well.

    Hope that helps,

    Reply With Quote


    Thread Tools
    Display Modes

    Similar Threads for: Sendero questions
    Thread Thread Starter Forum Replies Last Post
    Rem 700 Sendero caliber swap questions MudRunner2005 Long Range Hunting & Shooting 50 01-24-2013 05:21 PM
    300 WM Sendero SF 11 Questions Wisner74 Rifles, Bullets, Barrels & Ballistics 4 10-06-2010 02:50 PM
    300 WM Sendero SF 11 Questions Wisner74 Gunsmithing 1 10-05-2010 11:45 PM
    remington 700 sendero questions THERIDDLER07SMS Long Range Hunting & Shooting 67 06-05-2009 02:05 AM
    XCR 338 RUM + HS Precision stock. Questions, Questions, Questions raisincenter The Basics, Starting Out 2 11-28-2007 02:44 PM

    All times are GMT -5. The time now is 07:00 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC