close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

scope problem

LinkBack Thread Tools Display Modes
  #8  
Unread 07-18-2013, 07:57 AM
Platinum Member
 
Join Date: Jan 2008
Posts: 1,130
Re: scope problem

Quote:
Originally Posted by Nimrod View Post
I had this problem with a 700 SPS in 7MM/08, the barrel was cross threaded.

that's crazy! no safety issues there.
Reply With Quote
  •   #9  
    Unread 07-18-2013, 04:38 PM
    Junior Member
     
    Join Date: Apr 2013
    Posts: 8
    Re: scope problem

    thanks for the info guys
    Reply With Quote

      #10  
    Unread 07-18-2013, 10:11 PM
    Silver Member
     
    Join Date: Aug 2009
    Location: Colorado
    Posts: 341
    Re: scope problem

    I had this problem with a new 5r milspec and it was a bad EGW base.
    Reply With Quote
      #11  
    Unread 08-04-2013, 12:00 PM
    Junior Member
     
    Join Date: Apr 2013
    Posts: 8
    Re: scope problem

    hey guys thanks again for the info ,i got home from camp pulled my scope off and . I put a straight edge on the millet rail , and notice it was not sitting flat on the receiver. I went and put on weaver base on the gun is shooting good and, windage is very close to optic center. I think I will get some devcon and bed the millet rail and see how that works me .
    Reply With Quote
      #12  
    Unread 08-05-2013, 10:50 AM
    Platinum Member
     
    Join Date: May 2008
    Location: South of Canada and North of Wyoming
    Posts: 6,068
    Re: scope problem

    Quote:
    Originally Posted by mulegotbeer View Post
    hey guys thanks again for the info ,i got home from camp pulled my scope off and . I put a straight edge on the millet rail , and notice it was not sitting flat on the receiver. I went and put on weaver base on the gun is shooting good and, windage is very close to optic center. I think I will get some devcon and bed the millet rail and see how that works me .
    Do a stress free job


    __________________
    - Mark

    You will never know how much it has cost my generation to preserve your freedom. I hope you make good use of it.
    ~ John Quincy Adams
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 05:32 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC