close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

Point of Aim vs. Point of Impact

LinkBack Thread Tools Display Modes
  #8  
Unread 11-23-2010, 09:29 AM
Silver Member
 
Join Date: Sep 2009
Location: Rockwall, TX (Dallas Area)
Posts: 203
Re: Point of Aim vs. Point of Impact

edge, the scope is set at +1 from bottom/0. I did not want to adjust up to the point of aim with the scope. I wanted to use a base with the appropriate cant in it so that I can fully utilize the 56MOA adjusment in the scope.

Badger Ordnance measurement between screw hole 2 to hole 3 (front to rear) is 4.5 inches.
Reply With Quote
  •   #9  
    Unread 11-23-2010, 09:50 AM
    Platinum Member
     
    Join Date: Nov 2005
    Posts: 1,088
    Re: Point of Aim vs. Point of Impact

    It sounds like you need about another 0.025 of shims.

    I would think that a base with built in MOA would be better since you may be torquing the base unless you are bedding the base too.

    edge.
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Point of Aim vs. Point of Impact
    Thread Thread Starter Forum Replies Last Post
    Changing point of impact? mnhunter2 Rifles, Bullets, Barrels & Ballistics 1 10-25-2010 07:28 AM
    does point of impact change? Hoyt10 Long Range Scopes and Other Optics 4 12-17-2006 03:08 AM
    Point of Impact azsugarbear Rifles, Bullets, Barrels & Ballistics 6 04-26-2006 05:42 PM
    Impact point with different 243 bullets jab22 Rifles, Bullets, Barrels & Ballistics 6 10-01-2005 09:03 PM
    Does Point of Impact Change when you... Ernie Long Range Hunting & Shooting 3 03-05-2003 05:32 PM


    All times are GMT -5. The time now is 01:19 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC