Appreciate the kinds words and feedback.
We can make custom feet , front plates (different stock widths) and leg lengths.
Given the modular nature of the design, you can change various parts to suit. In the works are different plates to suit various stock widths (already make a 3" wide for big target stocks and final touches on a 2" for sporter stocks). Since all hardware spacing is the same, you can swap plates and have a different application.
Working on the assembly video which hopefully will be ready next week. Once you see how simple it is to put together, changing various components is entirely up to your imagination.
As for a hinged leg, well we already have something very similar.
The legs have 4 bolts per side which bolt into the leg spacer. We could easily make a through bolt for the top (hinge) and another on the bottom which would be easy to remove.
We would just weld nuts on one plate instead of bolting into the spacer. Spin out the bottom bolts, loosen the top, swing the legs in....
Prefer to pull the legs completely out of the central plate mount? we might even be able to find some QD hardware which can let you take apart to 3 major components (or just unscrew the 4 bolts). Fit inside a case 3"X2"X7" or there abouts. Way smaller footprint then a harris.
Weight would go up for the extra hardware but still only a couple of ounces more.
Voila, as the manf, not much we can't do for you. Custom work would not change the overall cost much
If interested, please give me a shout at
info@mysticprecision.com and we can fab up something for you.
Jerry
Without the First and Second Amendments the rest of The Constitution is Meaningless.
Linear Mode
