close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

Loads for 160 Accubonds or Partitions in a 7mm rem mag

LinkBack Thread Tools Display Modes
  #1  
Unread 01-11-2012, 11:41 PM
Junior Member
 
Join Date: Sep 2011
Posts: 27
Loads for 160 Accubonds or Partitions in a 7mm rem mag

I'm looking to reload some new rounds for the 7mm rem mag. Could someone help me with some starting data for the 160 grain nosler accubonds or partitions. Thank you
Reply With Quote
  •   #2  
    Unread 01-11-2012, 11:54 PM
    Platinum Member
     
    Join Date: Jul 2004
    Location: Texas
    Posts: 7,001
    Re: Loads for 160 Accubonds or Partitions in a 7mm rem mag

    I would start with H 4831 or H 4831 sc @ around 60 grains and work up.

    Partitions will show pressure signs sooner than the Accubonds because of the extra bearing surface
    so start with the Accubonds first and when signs of pressure show up reduce the charge by 2 grains
    and try the partitions if you want to.

    There are other good powders but the most accurate in my experance has been with the H 4831 sc.

    Just a good place to start.

    J E CUSTOM
    __________________
    "PRESS ON"
    Reply With Quote

      #3  
    Unread 01-12-2012, 02:56 AM
    Gold Member
     
    Join Date: Aug 2007
    Location: Canterbury, New Zealand
    Posts: 675
    Re: Loads for 160 Accubonds or Partitions in a 7mm rem mag

    With the 160 accubond I ended up at 71gr H1000, with federal brass, federal 215 primer, gave me aboput 3070 fps with a 26" barrel.
    Work up to this load, my last tin of H1000 was about 1.5gr faster than the previous.

    Stu.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Loads for 160 Accubonds or Partitions in a 7mm rem mag
    Thread Thread Starter Forum Replies Last Post
    want to sale .338 250 gr accubonds and partitions lamiglas Reloading Equipment and Components 6 01-26-2011 02:31 PM
    Goto loads for 7mm REM Mag and 160 Accubonds dwm Reloading 25 11-28-2009 12:49 PM
    338 Edge H1000 loads and 225 Accubonds daveosok Reloading 1 11-22-2007 08:49 PM
    Loads for 7mm Ultra and 160 Accubonds Idaho_Elk_Huntr Reloading 11 01-09-2006 11:52 AM
    Minimum Impact Velocities for Partitions and Accubonds QuietHunter Rifles, Bullets, Barrels & Ballistics 2 09-30-2003 04:06 PM


    All times are GMT -5. The time now is 06:44 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC