Well here is mine, I realize I went against the grain with a short barrel (17.75" without the brake), but I did the work myself and in order to fit the big barrel in my small lathe I had to chop it down. I was getting 250 SMK's out at 2850. The barrel is a used Lawton with a Harrels muzzle brake, I picked up from a member here, Savage long action with a SSS recoil lug and trigger, Sightron SII 4.5-14 mildot sidefocus scope, Reamer came from PTG with a .365 neck and the barrel is fitted without the barrel nut. It's got the crummy tupperware stock, but next up will be to replace that with a decent laminated one. had some accuracy issues at first that I attributed to me flinching from the muzzle blast, or the tupperware stock and put it up for a bit, but I just robbed the scope from it, and discovered the front scope base was loose, I'll have to get it out again soon.