Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics


Reply

Jewell HVR Trigger

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-23-2007, 09:42 AM
Silver Member
 
Join Date: Jan 2007
Posts: 114
Jewell HVR Trigger

Put a Jewell in my Sendero 7mm RM.. came set at 1 lb. and I bumped it up to 2.5 LBS

What do you all think for a hunting rifle and minor bench stuff ? A little to high or keep it there ?

Worried that if shooting with gloves out coyote hunting in 10 degrees or less, wouldn't feel trigger and that it would give me a little room to squeeze on it...

Thanks for your comments...
Reply With Quote
  #2  
Old 01-23-2007, 09:52 AM
Gold Member
 
Join Date: Dec 2006
Location: FREE RUN, MS
Posts: 774
Re: Jewell HVR Trigger

mines at 2.5.....but it aint a Jewell!
__________________
MEMBER "AM STRIKEFORCE"
Reply With Quote
  #3  
Old 01-23-2007, 02:09 PM
Chawlston
 
Posts: n/a
Re: Jewell HVR Trigger

[ QUOTE ]
Put a Jewell in my Sendero 7mm RM.. came set at 1 lb. and I bumped it up to 2.5 LBS

What do you all think for a hunting rifle and minor bench stuff ? A little to high or keep it there ?

Worried that if shooting with gloves out coyote hunting in 10 degrees or less, wouldn't feel trigger and that it would give me a little room to squeeze on it...

Thanks for your comments...

[/ QUOTE ]

Most folk don't buy jewell triggers to have them set at 2.5 lbs. If you are going to keep it at 2.5, you might as well sell it and put the extra bucks into other accessories. I have four set at about 4 ounces and five set at 1.5 oz. It depends on what you are familiar with.

Cut the trigger finger out of your glove or use the flop back mittens.

James
Reply With Quote
  #4  
Old 01-23-2007, 06:25 PM
Gold Member
 
Join Date: Dec 2006
Location: Dogpatch, NY
Posts: 698
Re: Jewell HVR Trigger

Sounds just fine. I got a Jewell trigger sitting on the counter, do beleive its going to find a home in a 300 RUM set at 2 #.
Reply With Quote
  #5  
Old 01-23-2007, 06:51 PM
Platinum Member
 
Join Date: Jun 2001
Location: Potomac River
Posts: 5,059
Re: Jewell HVR Trigger

My fingers are not very sensitive so I had Kirby move my Jewell up to 2.3 pounds. At that weight I can begin to actually feel I am touching the trigger.

Clay Spencer took most of the slack out of my Timney and I had to put it back in. [img]/ubbthreads/images/graemlins/grin.gif[/img]

Doc Ed set my Rem 700 at about 2.5 pounds after I tried and couldn't.
__________________
The Smokin Fur Rifle Club
Reply With Quote
  #6  
Old 01-24-2007, 11:54 PM
Silver Member
 
Join Date: Jan 2007
Posts: 114
Re: Jewell HVR Trigger

Thanks guys.... jsut thought I'd see where everyone else was at .... feels to good to me and still breaks excellent.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Jewell HVR Trigger
Thread Thread Starter Forum Replies Last Post
Jewell Trigger Rem 700 F/S sidehill Gun Parts - Stocks, Barrels, Actions, etc. 2 08-01-2011 09:51 AM
Jewell trigger DCGS Gunsmithing 11 04-23-2010 08:39 AM
Jewell Trigger Sparkey Equipment Discussions 3 02-28-2010 08:43 PM
WTB Jewell Trigger royinidaho Gun Parts - Stocks, Barrels, Actions, etc. 2 05-04-2009 09:33 AM
WTB Rem Jewell trigger safarihunter Gun Parts - Stocks, Barrels, Actions, etc. 3 07-26-2007 02:47 PM


All times are GMT -5. The time now is 02:37 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC