Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics


Reply

How much Torque on a Remmy 700 Sendero?

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-17-2009, 10:30 PM
Bronze Member
 
Join Date: Nov 2008
Location: Sabinal, TX
Posts: 48
How much Torque on a Remmy 700 Sendero?

Hey there y'all!

My brother is putting his Sendero action back into the stock and we're not sure HOW MUCH Torque to apply to the two bolts in the bottom plate. Can someone tell us?

Thanks so much!

Nick
Reply With Quote
  #2  
Old 03-17-2009, 11:01 PM
Platinum Member
 
Join Date: Jul 2004
Location: Texas
Posts: 5,593
Re: How much Torque on a Remmy 700 Sendero?

Quote:
Originally Posted by SouthTXBowhunter View Post
Hey there y'all!

My brother is putting his Sendero action back into the stock and we're not sure HOW MUCH Torque to apply to the two bolts in the bottom plate. Can someone tell us?

Thanks so much!

Nick
Do a search on torque recomendations.

I posted one that should answer your questions.

If it is wood,wood with pillars,wood with a bedding block.all of these variations have different torque.

J E CUSTOM
__________________
"PRESS ON"

Last edited by J E Custom; 03-17-2009 at 11:43 PM.
Reply With Quote
  #3  
Old 03-18-2009, 11:12 AM
Platinum Member
 
Join Date: Feb 2005
Location: Nevada
Posts: 2,782
Re: How much Torque on a Remmy 700 Sendero?

Quote:
Originally Posted by SouthTXBowhunter View Post
Hey there y'all!

My brother is putting his Sendero action back into the stock and we're not sure HOW MUCH Torque to apply to the two bolts in the bottom plate. Can someone tell us?

Thanks so much!

Nick

Here is J E CUSTOM'S LIST.


Quote:
How Tight

Torque

The question has been asked on several occasions
what the torque for bedding screws and scope bases
should be so I though this might be helpfull.

"NOTE" These are based on full engagement of threads.

Wood, Fiberglass or Synthetic stock without bedding pillars-
40 inch-lbs.

Wood, Fiberglass or Synthetic stock with bedding pillars -
up to 65 inch-lbs.

Hard-use service-type rifles in synthetic with pillars-
up to 65 inch-lbs.

Law enforcement & military rifles are 65 inch-lbs on each
of the guard screws.

On rifles with three guard screws the middle screw should
be only slightly tightened.

Scope base screws 30 inch-lbs "MAX"

Windage screws 30-40 inch-lbs "MAX"

Scope ring screws (Aluminum Rings) 10-15 inch-lbs "MAX"

Scope ring screws (Steel Rings) 15-20 inch-lbs "MAX"

Note' If scope base and ring Screws have less than 5 threads
of engagement they should be replaced with longer ones.

Barrel to receiver Torque 35 ft/lbs minimum to 95 ft/lbs Max.

If an anti seize compound is used instead of a light oil use 65
ft/lbs max to prevent over torquing.

I hope this will help
J E CUSTOM
__________________
-----------------------------

-----------------------------
HEBREWS 13:8
Jesus Christ the same yesterday, and to day, and for ever.

Our Lord Jesus said that as it was in the days of Noah and
also as it was in the days of Lot so it shall be in the days...
It's happening again!!! God sent to us His prophet, and His Word
to this generation and we once more are rejecting it as was prophesied!!!

---> As promised, God Sent His Prophet to us!
Reply With Quote
  #4  
Old 03-18-2009, 05:32 PM
Platinum Member
 
Join Date: Jul 2004
Location: Texas
Posts: 5,593
Re: How much Torque on a Remmy 700 Sendero?

Thanks Eaglet!!!!!!!!

I wish I was better with computers .

J E CUSTOM
__________________
"PRESS ON"
Reply With Quote
  #5  
Old 03-19-2009, 07:25 PM
SPONSOR
 
Join Date: Mar 2004
Location: Danville, PA
Posts: 1,083
Re: How much Torque on a Remmy 700 Sendero?

Can't argue with a list like that. I tend to tighten on the higher end of those numbers, but I grew up on a farm. There's tight and farmer tight.
__________________
Home of the "EXTENDED IMPACT" DVD

www.mcrifles.com
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: How much Torque on a Remmy 700 Sendero?
Thread Thread Starter Forum Replies Last Post
Remmy Mod 7 in 300 WSM Strick9 Guns For Sale 5 03-19-2011 07:02 PM
have remmy l/a what to do? splattermatic Long Range Hunting & Shooting 22 04-28-2008 01:40 PM
my remmy or my m1? whisperinthewind The Basics, Starting Out 4 02-29-2008 07:39 PM
Torque on factory Sendero action? Casey Napier The Basics, Starting Out 7 10-30-2006 08:02 PM
What's the lb. of a Remmy? goodgrouper Rifles, Bullets, Barrels & Ballistics 1 11-25-2005 09:25 PM


All times are GMT -5. The time now is 03:51 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC