Long Range Hunting Online Magazine how many MOA?
 Home LRH Store Forums Long Range Rifles Articles Reviews Video G7 Ballistics Calculator Rules & FAQ Register Search Today's Posts Mark Forums Read

# how many MOA?

#1
03-19-2003, 08:36 PM
 Bronze Member Join Date: Mar 2003 Location: Gainesville, FL Posts: 38
how many MOA?

IF I have my 300 RUM sighted in at 100, then how many clicks should i make to have it on paper at 500? 700? 1000? By the way i have a leopold 6.5X20X50 Long Range. I am shooting a BC of .47 @ 3300 fps.
#2
03-20-2003, 03:36 AM
 Platinum Member Join Date: May 2001 Posts: 2,377
Re: how many MOA?

Smoak

I will provide a link to the site for a free on-line calculator that can provide your answer.

I can't give you the exact answer because you have left off some of the variables.
http://www.eskimo.com/~jbm/ballistic...raj_basic.html

You don't state the ambient temperature nor geographic altitude (I see you've stated Florida) where you will use this data.

A short lesson in approximation:

A standard set of come-ups that I have used for years with the 308 Win will provide a very close set of data for nearly any proper rifle. Figure the 308 Win data as a base value of 1.0 and figure the magnums and flat shooters at a value between .66 and .75.

Yds Come-up (in MOA)
100 -0-
200 -2-
300 -3-
400 -3.5-
500 -3.5-
600 -4-
700 -4.5-
800 -5-
900 -6-
1000 -7-

These are individual come-ups, you must add this together to get a total come-up in MOA. As an example, 500 yards is 2 + 3 + 3.5 + 3.5 or 12 as a total. You come-up for the 300 will be in the .66 range I'd guess... about 8 MOA of UP over your accurate 100 yard ZERO.

To use these calculation programs correctly, you use a 100 yard zero and record the "drop" at the ranges desired. Once you have the "drop" you back-calculate the elevation requirement. For a .47 BC round at 3300fps and "STP" conditions the drop as stated (displayed by JBM) is stated as 36.8 inches. 36.8 / 5 (500 yards) is 7.36 inches, now convert this to MOA by dividing by 1.047 and you have 7.02 MOA up needed for 500 yards. (My quick rule-of-thumb 8 MOA estimate would have had you 5 inches low on the target, close enough for beginning data. )

[ 03-20-2003: Message edited by: Dave King ]
#3
03-20-2003, 03:40 AM
 Platinum Member Join Date: Feb 2003 Location: Pueblo, CO Posts: 1,154
Re: how many MOA?

Smoak, if you don't have a ballistics program you ought to get one. It sure makes the job easier, and will get you on paper quicker, and cheaper. Try Exbal by Gerald Perry. I think it's only \$35, and it calculates comeup clicks for you, and it is just slick to work.
www.perry-systems.com
#4
03-20-2003, 08:40 AM
 Platinum Member Join Date: Jun 2007 Location: Fredericksburg VA Posts: 3,961
Re: how many MOA?

smoak

Couple things.

1. buy the ballistics calculator program.

2. understand that 1/4 MOA is not 1/4 inch, it is .262 inches. Just like difference in yards and meters. Got to know it.

3. Scope clicks may be in MOA, 1/4 inch or something else even thought the scope is marked 1/4 inch. Scope marked 1/4 inch have been documented as far as .282 inch.

4. You do not know what your scope clicks really are without testing to find out.

5. Decide what you are really asking for, Ie What are your comeups in MOA, inches,or number of actual scope clicks for your scope. All may be different. But what you want should be tied to what your scope will give you, otherwise you are converting everything.

6. Go to Dan Lilja's website and read his article on preparing a "drop chart" and determining what your scopes click values really are.

BH

 Bookmarks

 Thread Tools Display Modes Linear Mode

 Current Poll Do you wear hearing protection while hunting? Usually do Usually do not No but I probably will in future
 Current Poll - 2 Do you have a high speed Internet connection? Yes, DSL, satellite, wireless or something else. - 89.19% No, only dialup right now. - 10.81% Total Votes: 3,052You may not vote on this poll.

All times are GMT -5. The time now is 03:47 AM.