Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics


Reply

G7 bc for .277 165 grain matrix vld

 
LinkBack Thread Tools Display Modes
  #8  
Old 07-23-2012, 09:08 PM
Platinum Member
 
Join Date: Nov 2008
Location: SW Montana
Posts: 4,553
Re: G7 bc for .277 165 grain matrix vld

Mulehunters numbers are a dang good place to start IMO, depending on the program you use it will get you out there a ways. With the 165 I can use a G1 BC of .650 in Loadbase and it will be nuts on to 1890 yards, using Applied Ballistics program a G7 BC of .314 work very well this last weekend shooting 1001 and 1890 yards, a G1 needs to be stepped to get out there that far.
Very fun shooting a 270 WSM that far, it holds it own rather well!! I just passed 800 rounds on this barrel and the throat is holding well!!
__________________
High Fence, Low Fence, Stuck in the Fence, if I can Tag it and Eat it, it's Hunting!

"Pain is weakness leaving your body"
Reply With Quote
  #9  
Old 07-23-2012, 09:12 PM
Platinum Member
 
Join Date: Dec 2008
Location: Great Falls, MT
Posts: 4,928
Re: G7 bc for .277 165 grain matrix vld

Quote:
Originally Posted by MuleHunter View Post
Post number 24 was an estimate. I have tested the matrix 175 here is the info for my testing.

G7=.3225

G1=.6435

My friend who has a similar test method as me has tested the 165 matrix at the following,

G1=.638

That would make the G7=.319

Good luck, make sure your scope tracks when your figuring out your drop data, if the click values are off on your scope it will mess up your solutions from your ballistics program and you will be chasing velocity and BC numbers trying to get it to match.
I remember you providing the same above info but can't seem to find your post to the thread.
__________________

I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



"I am always proud of my country!"

"Leadership Rule #2: Don't be an @zzhole." - Maj Gen Burton Field.
Reply With Quote
  #10  
Old 07-23-2012, 09:20 PM
Platinum Member
 
Join Date: Nov 2008
Location: SW Montana
Posts: 4,553
Re: G7 bc for .277 165 grain matrix vld

Quote:
Originally Posted by FEENIX View Post
I remember you providing the same above info but can't seem to find your post to the thread.
It's in the ELR section.
__________________
High Fence, Low Fence, Stuck in the Fence, if I can Tag it and Eat it, it's Hunting!

"Pain is weakness leaving your body"
Reply With Quote
  #11  
Old 07-23-2012, 11:20 PM
Platinum Member
 
Join Date: Dec 2008
Location: Great Falls, MT
Posts: 4,928
Re: G7 bc for .277 165 grain matrix vld

Quote:
Originally Posted by bigngreen View Post
It's in the ELR section.
Copy that, thanks!
__________________

I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



"I am always proud of my country!"

"Leadership Rule #2: Don't be an @zzhole." - Maj Gen Burton Field.
Reply With Quote
  #12  
Old 07-24-2012, 05:47 AM
Platinum Member
 
Join Date: Dec 2008
Location: Great Falls, MT
Posts: 4,928
Re: G7 bc for .277 165 grain matrix vld

Found it! #3 of G7 bc for .277 165 grain matrix vld

#5 = reference to ELR.
__________________

I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



"I am always proud of my country!"

"Leadership Rule #2: Don't be an @zzhole." - Maj Gen Burton Field.
Reply With Quote
  #13  
Old 07-24-2012, 03:06 PM
Gold Member
 
Join Date: Mar 2012
Location: Wolfesville, MD
Posts: 830
Re: G7 bc for .277 165 grain matrix vld

I just bought a 270 STW w/ a 26" barrel used. It came w/ 150 rds of new brass getting 3450 fps w/ the 150 gr partition bullet so I'm hoping I will get 3300 fps w/ the 165 Matrix. That should smoke um
Reply With Quote
  #14  
Old 07-25-2012, 10:04 PM
Silver Member
 
Join Date: Dec 2008
Location: Tri-Cities, WA
Posts: 129
Re: G7 bc for .277 165 grain matrix vld

Quote:
Originally Posted by bigngreen View Post
Mulehunters numbers are a dang good place to start IMO, depending on the program you use it will get you out there a ways. With the 165 I can use a G1 BC of .650 in Loadbase and it will be nuts on to 1890 yards, using Applied Ballistics program a G7 BC of .314 work very well this last weekend shooting 1001 and 1890 yards, a G1 needs to be stepped to get out there that far.
Very fun shooting a 270 WSM that far, it holds it own rather well!! I just passed 800 rounds on this barrel and the throat is holding well!!
bigngreen has played with the 165's allot more than I have. The .650 BC number intrigues me. I sought to mimic Litz's testing of providing an average BC across the 3,000 fps to 1,500 fps velocity band. Using a point mass solver like Shooter, JBM, or the G7 ballistic programs my numbers have been perfect. I think that is what bigngreen was trying to say in not so many words. Loadbase is not a point mass solver from what I understand, so if you are using a free online program start with my numbers. If you are using Loadbase use bigngreen's numbers.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: G7 bc for .277 165 grain matrix vld
Thread Thread Starter Forum Replies Last Post
matrix bullets str8meat Reloading 5 11-21-2013 08:05 AM
Has anyone used matrix bullets? roundss Rifles, Bullets, Barrels & Ballistics 38 11-14-2013 11:47 AM
Matrix Bullets remmy1187 Rifles, Bullets, Barrels & Ballistics 3 01-14-2012 12:11 AM
165 Matrix in a 270 WSM Booney Reloading 2 09-28-2011 12:23 AM
7mm RUM and 190 Matrix sledder1 Reloading 3 05-18-2011 05:01 PM


All times are GMT -5. The time now is 07:13 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC