close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

Brass & Primers

LinkBack Thread Tools Display Modes
  #1  
Unread 02-23-2011, 11:26 PM
Bronze Member
 
Join Date: Jan 2011
Posts: 63
Brass & Primers

What brand of brass and primers are most guys using. Say for a .30-06 and 7mm Rem Mag and 300 Win. mag?

Thanks
Reply With Quote
  •   #2  
    Unread 02-23-2011, 11:55 PM
    Silver Member
     
    Join Date: Oct 2009
    Location: Northeast MS
    Posts: 388
    Re: Brass & Primers

    Quote:
    Originally Posted by luke5678 View Post
    What brand of brass and primers are most guys using. Say for a .30-06 and 7mm Rem Mag and 300 Win. mag?

    Thanks
    I don't load for 30-06, but I think Lapua makes brass for it so that is probably going to be the best you can get in that caliber. I do however load for the 2 others you mentioned. For the 7mm I currently use Nosler brass and have had good luck with it so far. It requires very little prep work before you load it, and it is very consistent. The only complaint I have heard about it from some is that it may be slightly softer than other brass and primer pockets loosen up as a result. I have some on its 4th loading and haven't experienced this yet. For the 300 I use Winchester brass. It is good brass but requires significant prep. I would say that I probably cull about 10% of cases due to severe neck deformity, but once it is prepped it is pretty good brass. I am considering trying to find some RWS brass for the 300, I have heard good things about it. As a general rule, I use the best brass that I can consistently get.
    Reply With Quote

      #3  
    Unread 02-24-2011, 02:03 PM
    Platinum Member
     
    Join Date: Dec 2008
    Location: rathdrum, id.
    Posts: 4,880
    Re: Brass & Primers

    Quote:
    Originally Posted by luke5678 View Post
    What brand of brass and primers are most guys using. Say for a .30-06 and 7mm Rem Mag and 300 Win. mag?

    Thanks
    RWS, Lapua, and Norma make the best brass but it is far more expensive. There is nothing wrong with RP and WW, but as was previously mentioned, it will need to be sorted and preped if you want good consistency. As far as primers go, I prefer Federal match, 210 or 215 depending on application. These are becoming very difficult to get because of military contracts. I also like CCI BR2 for my standard case rifles.........Rich
    Reply With Quote
      #4  
    Unread 02-24-2011, 06:48 PM
    Platinum Member
     
    Join Date: Apr 2010
    Location: Allen, TX
    Posts: 2,608
    Re: Brass & Primers

    For 7mm Rem Mag, I bought 2x boxes of Nosler Custom Brass and the TIR was >.005 at the shoulder on a large chunk of them even after resizing (which you basically shouldn't have to do with that brass).

    So, I complained and they didn't bat an eye and replaced both boxes. ...then, I realized my T-Mag was not helping and got a Forster co-ax press and life is good. ...My bad! But, kudos to Nosler for customer service.

    I later discovered Norma makes 7mm RM brass and I've found it to be the best.

    RP and the others go "bang" as well. But, #1 Lapua and #2 Norma seem to form better in the dies, with less runout, more even neck tension, and seemingly longer life. JMHO

    I like Fed GM215M for the magnums and CCI BR2 for plain large rifle.

    Happy hunting!
    Richard
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Brass & Primers
    Thread Thread Starter Forum Replies Last Post
    Old Military Brass and new primers tlk Reloading 2 07-23-2009 04:58 PM
    bullets, powder, brass, primers Darrell Holland General Discussion 0 07-18-2009 11:57 AM
    Got some old new brass and primers - BIG question tlk Reloading 3 06-09-2009 04:44 AM
    RWS Brass and Primers Randy in Va Rifles, Bullets, Barrels & Ballistics 3 06-02-2004 11:16 PM
    Primers and Brass sebell Rifles, Bullets, Barrels & Ballistics 4 03-23-2003 12:45 AM


    All times are GMT -5. The time now is 02:17 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC