close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

Anyone using Bertrum brass in edge

LinkBack Thread Tools Display Modes
  #1  
Unread 02-28-2013, 12:31 PM
Junior Member
 
Join Date: Aug 2009
Posts: 21
Anyone using Bertrum brass in edge

is anyone using bertrum brass in edge yet that could share there results and data. Any issues, how does it compare to remington and nosler, ETC
Reply With Quote
  •   #2  
    Unread 02-28-2013, 06:55 PM
    Platinum Member
     
    Join Date: May 2009
    Location: Sweet, Idaho
    Posts: 1,135
    Re: Anyone using Bertrum brass in edge

    Well, I am just picking up an edge that I just had built tomorrow so hopefully in the next couple of days I'll let you know as I bought some bertrum brass from DE.

    Randy
    __________________
    "Every man has a purpose---------mine is to be behind a rifle.........."

    "I'd rather wake up in the middle of nowhere than be in any city on earth." ---Steve McQueen
    Reply With Quote

      #3  
    Unread 02-28-2013, 07:17 PM
    Silver Member
     
    Join Date: Feb 2011
    Location: Nevada
    Posts: 324
    Re: Anyone using Bertrum brass in edge

    the brass is excellent . much better than Remington . a little costly but i believe your getting what you pay for . imho shawn wouldn't sell it if it was not good
    Reply With Quote
      #4  
    Unread 02-28-2013, 07:18 PM
    Silver Member
     
    Join Date: Jan 2010
    Posts: 169
    Re: Anyone using Bertrum brass in edge

    I have been using Remington 300 Rum necked to 338 in my edge and brass is junk. 3 loads and primer pockets are gone. With my Bertram DE brass I have reloaded test set of brass 15 times and pockets are still good to go. Another thing is my run out is always .0015=.002.
    Bertrain brass is the only way to go with the 338 Edge.
    Reply With Quote
      #5  
    Unread 03-01-2013, 06:20 PM
    Junior Member
     
    Join Date: Aug 2009
    Posts: 21
    Re: Anyone using Bertrum brass in edge

    thank guys for the feed back. Good to hear your getting that many loadings on the brass if you don't mind me asking what is your load, OAL, velocities, ETC
    Reply With Quote
      #6  
    Unread 03-01-2013, 06:39 PM
    Junior Member
     
    Join Date: Aug 2009
    Posts: 21
    Re: Anyone using Bertrum brass in edge

    thank guys for the feed back. Good to hear your getting that many loadings on the brass if you don't mind me asking what is your load, OAL, velocities, ETC
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 09:53 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC