close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

Anyone shooting the 7 LRM

LinkBack Thread Tools Display Modes
  #29  
Unread 01-28-2014, 02:05 PM
Silver Member
 
Join Date: Jun 2011
Location: Florida
Posts: 350
Re: Anyone shooting the 7 LRM

Mike I have not got my rifle yet I talked to my smith a last week an he said he has 2 rifles in front of me, but when he gets down to it, it only takes him 2 weeks to complete one from start to finish between gunsmithing and his other job so hopefully in the not too distant future I can post some pics and a range report.
Reply With Quote
  •   #30  
    Unread 01-29-2014, 04:07 PM
    Silver Member
     
    Join Date: Jan 2012
    Location: bend or.
    Posts: 161
    Re: Anyone shooting the 7 LRM

    Could a guy buy a rem 700 in 7rm and just have it re chambered in 7lrm, action trued and bolt face done and be ready to shoot? After getting brass and dies of course.
    Reply With Quote

      #31  
    Unread 01-29-2014, 05:05 PM
    Bronze Member
     
    Join Date: Dec 2004
    Location: Montana
    Posts: 43
    Re: Anyone shooting the 7 LRM

    I would have to imagine you could. I know that Gunwerks does some work with the 700 Sendero in a couple of there video's but they did not change the bore. They just did some stock work and trigger work and had it shooting really nice out to 1000 yards.
    Call Mike Davidson at Gunwerks 877-486-9375. I am sure he could answer your questions. I thought the gentleman that runs this website also builds a 7mmLRM. He could probably point you in the right direction also.
    Reply With Quote
      #32  
    Unread 01-30-2014, 10:30 AM
    Silver Member
     
    Join Date: Jun 2011
    Location: Florida
    Posts: 350
    Re: Anyone shooting the 7 LRM

    Quote:
    Originally Posted by coyotelite View Post
    Could a guy buy a rem 700 in 7rm and just have it re chambered in 7lrm, action trued and bolt face done and be ready to shoot? After getting brass and dies of course.
    Might be able to but, I believe they build their 7LRM with a 1-8 twist barrel to shoot the 180 Berger Hybrids that's what mine will have when it gets done. If you want to do that why not just get a 7STW or 7RUM off the shelf and have some action work and trigger work done and call it good. I don't know how much brass is for either one, but 7LRM brass is around $1.30 a piece from gunwerks and dies are $100.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 03:01 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC