7 wsm brux

[bcoving]

I have a 7 wsm with a brux barrel. Just started load dev. h4831 sc with bergers 168's. I'm not getting consistant results. Should I try h4350 next or h1000. The barrel is 24 inches. I want to stay with h powders unless I cant find a good load.

[webs]

What is the problem? Bad ES/SD or bad groups?

[bcoving]

It's just finicky. I have one charge and seating depth it likes and it will shoot and inch at 200 yards most of the time but has flyers too. The charges and seating depths it dont like shoots terrible. It just seams like its not the right combo.

[grit]

I run 180's with h1000. Mid sixties. Results are always superb.

[Ryan55555]

I have a 26" Brux chambered in 7WSM.

I also shoot Berger 180's and H1000 will great results.

Never tried anything else because this shot so well.

[bcoving]

Ill try h1000 and if that dont work try some 180s.

[elkoholic72]

I have a Brux 26" chambered in 7wsm, shoots 168s and H4831sc 64.3-65 with cci200 <1/2 inch, very consistant out past 1200yards. I also shoot the 162 Amax with same load and almost same results.

Ben