close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

338 Edge - Match Brass - FINALLY!

LinkBack Thread Tools Display Modes
  #29  
Unread 12-26-2012, 11:01 AM
Silver Member
 
Join Date: Feb 2011
Location: Nevada
Posts: 324
Re: 338 Edge - Match Brass - FINALLY!

morning has anyone got any of this brass yet ?? i've emailed shawn no reply yet . also shawn will my 338 edge dies work well on the shoulder ? thanks
Reply With Quote
  •   #30  
    Unread 12-26-2012, 05:03 PM
    Silver Member
     
    Join Date: Feb 2011
    Location: Nevada
    Posts: 324
    Re: 338 Edge - Match Brass - FINALLY!

    cancel that post brass on order
    Reply With Quote

      #31  
    Unread 01-10-2013, 06:48 PM
    Silver Member
     
    Join Date: Jan 2010
    Posts: 169
    Re: 338 Edge - Match Brass - FINALLY!

    Got my shipment of the 338 edge Bertran brass from Shawn Carlock Defensive edge.
    Took 20 brass and checked them out by weight and found ES- 1.5 which is out standing. Then checked head space, siezed down and trimmed brass .

    Loaded 90 gr H1000-Fed 215match primers pushing 300 gr bergers at 2815FPS. Checked concentricity .0015 with Bertran and best ever with Remington was .0025

    Three shot group at 300 yards 3/4 inch, very happy with that.
    Then took my Remington loaded rounds with the same load and found the three shot group open up to just over 1 1/2 inch at 300 yards.

    This brass is equal or better that Lapua brass that I have used for the 6MMBR and 22-250.

    Bottom line is ,yes it cost more than Remington but is much better and I expect to get over 15 or more reloads before primer pocket goes away which reduces your cost of brass.

    Thank you Shawn for you bird dogging to get this brass for us 338 edge shooters.
    Charlie
    Reply With Quote
      #32  
    Unread 01-14-2013, 08:43 AM
    Sponsor
     
    Join Date: Jun 2007
    Location: North Idaho
    Posts: 1,882
    Re: 338 Edge - Match Brass - FINALLY!

    Glad you liked it. We have about 2000 pieces out the door now and should be hearing some more input from others as they start to use it.
    __________________
    Shawn Carlock

    www.defensiveedge.net
    1-208-687-2659
    Reply With Quote
      #33  
    Unread 01-14-2013, 07:13 PM
    Silver Member
     
    Join Date: Feb 2011
    Location: Nevada
    Posts: 324
    Re: 338 Edge - Match Brass - FINALLY!

    shawn i think everyone says thanks . just waiting on brass and i'll let you know . once again thanks
    Reply With Quote
      #34  
    Unread 01-14-2013, 10:44 PM
    Bronze Member
     
    Join Date: Apr 2011
    Location: Tucson, Arizona
    Posts: 85
    Re: 338 Edge - Match Brass - FINALLY!

    Sorry I don't have an EDGE yet but will soon enough..... my question is do you know if they make 338RUM brass?
    Reply With Quote
      #35  
    Unread 01-15-2013, 12:15 AM
    Platinum Member
     
    Join Date: Nov 2008
    Posts: 1,087
    Re: 338 Edge - Match Brass - FINALLY!

    Quote:
    Originally Posted by motoxno53 View Post
    Sorry I don't have an EDGE yet but will soon enough..... my question is do you know if they make 338RUM brass?
    He will if you want a couple of thousand.........LOL.

    You may be able to form .338RUM brass from this stuff and have considered doing it with the stuff that I have here. Think you may need to possibly neck turn the bottom section of the formed neck as it could be quite thick.

    You will also have to trim to length. Maybe not worth the effort?
    __________________
    scientia est potentia
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 338 Edge - Match Brass - FINALLY!
    Thread Thread Starter Forum Replies Last Post
    Finally the Defensive Edge LRKM is unveiled Shawn Carlock Long Range Hunting & Shooting 114 12-26-2012 08:56 PM
    264 WinMag Brass - Norma finally shipped!! scoutm Reloading 4 11-05-2012 10:38 PM
    338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
    Resizing edge brass on edge dies nddodd Reloading 7 07-28-2009 04:58 AM
    .338 Edge primers CCI or Fed. Match B23 Reloading 17 03-13-2009 05:49 AM


    All times are GMT -5. The time now is 08:29 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC