.308?

[longrange700]

does it have a muzzle brake installed, what bullet, almost has to be a scope problem or the crown good luck

[Tang]

Originally Posted by kc

Will do! I load for accuracy, right down to the grain, cases, primers and AOL is right on.
I even load for my friends and thay love the consistancy with the accuricy and the care I use
to make the loads. I even check the run out on cases and the cartrige before and after the load.

@ 100 yards I can get 1 to 1.5.

1.5" @ 100yds just don't sound right for any varmint style rig. Definetly pull the scope and check the bases, then put extra care in mounting the rings and scope. Then check the crown as other's have said. Also, what are you shooting off of at the range ?

[kc]

We have a solid bench /table Cement beams no muzzel break I shooting for the crown,
I check every bullet(speer 168) before I finish each load..I don't load blind.

[kc]

We have a solid bench /table Cement beams no muzzel break I shooting for the crown,
I check every bullet(speer 168) before I finish each load..I don't load blind. I have a Harris Bi-Pod
Sand bags.

[liltank]

Well there's your problem, "Speer 168"! Have you tried any other bullets yet? Depending on what Speer bullet you are using, this could be contributing to your in accuracy at longer ranges. Have you had success with this bullet in the past (.5, .75" groups at 100yrds)?


Tank

[kc]

Not yet, I plan to get some Hornaday 165s and try this bullet..I just started working a load for this rifle.

[liltank]

What speer bullet were you using? BTHP Match?

Tank