Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics


270 WSM info needed

LinkBack Thread Tools Display Modes
Unread 02-17-2011, 09:35 AM
Silver Member
Join Date: Dec 2010
Location: SD
Posts: 463
Re: 270 WSM info needed

I would develop loads with H4831 or H4350 and 130g Accubond or Interbonds and 150g Partitions first. They will kill anything out to 600+yards.

The Bergers would come after that. They are usually a little more difficult to find a good load for.

The H series powders are not temperature sensitive. R17 is supposed to be not temp sensitive and may be a good one.
Reply With Quote

Unread 02-17-2011, 01:29 PM
Junior Member
Join Date: Feb 2011
Posts: 29
Re: 270 WSM info needed

I recently purchased a win mod 70 and had a b&c medallist stock with pillars, block and glass bedded also did the jp trigger and now in for a break. I love this gun! Before the break I was pulling .4 inch 3 shot at a hundred. I have just been waiting to get it back with the break to shoot it some more. I have the Zeiss 6.5-20x50 on it and when I get time to shoot it through the crono I am gonna have kenton ind build the turrets for it. I am shooting the hornady sst's thru it and they are working great!
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 270 WSM info needed
Thread Thread Starter Forum Replies Last Post
6.5-06 Info needed sundance1972 Reloading 16 05-03-2011 11:35 PM
needed info stealth_hunter Elk Hunting 2 11-04-2008 08:00 AM
50 Bmg info needed cinch Rifles, Bullets, Barrels & Ballistics 10 12-11-2006 07:40 PM
6mm JDJ info needed Freebore Specialty Handgun Hunting 2 11-29-2006 09:13 AM
More info needed on 243 AI & RL-25 dibbs Long Range Hunting & Shooting 2 12-13-2002 12:20 AM

All times are GMT -5. The time now is 08:48 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC