close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

.264 win mag

LinkBack Thread Tools Display Modes
  #106  
Unread 07-13-2013, 12:11 PM
Junior Member
 
Join Date: Apr 2012
Posts: 8
Re: .264 win mag

the 140 partitions are for elk and will get used for mule deer also.
Reply With Quote

  #107  
Unread 07-13-2013, 04:47 PM
Platinum Member
 
Join Date: Jul 2009
Location: GEORGIA
Posts: 1,237
Re: .264 win mag

A buddy of mine had one built (.264 AI) that shoots 6" five shot groups or less with a 31" bbl. consistently if he reads the wind good at 1,000 yds. - - - - - - - - - - - - -

gt40
Reply With Quote
  #108  
Unread 07-18-2013, 02:47 AM
Bronze Member
 
Join Date: Apr 2008
Location: South Africa
Posts: 83
Re: .264 win mag

Quote:
Originally Posted by Codave101 View Post
They are hand loads. 62 grains Retumbo OAL 3.223 fed mag primers . getting higher vel then the book states for powder charge but I have NO PRESSURE signs.
At what speed are you sending them out?
Reply With Quote
  #109  
Unread 07-18-2013, 07:53 PM
Junior Member
 
Join Date: Apr 2012
Posts: 8
Re: .264 win mag

Quote:
Originally Posted by Jinx View Post
At what speed are you sending them out?
The average for the 12 shot string was 3174.
Reply With Quote
  #110  
Unread 12-11-2013, 06:25 PM
Junior Member
 
Join Date: Dec 2013
Posts: 1
Re: .264 win mag

Just started a semi custom build based on a savage 110. Very excited for it to be finished
Reply With Quote
  #111  
Unread 11-28-2015, 02:48 AM
Junior Member
 
Join Date: Nov 2015
Posts: 1
Re: .264 win mag

Hello there. After many years of shooting and hunting with 6.5's I have found a Savage 110L 264 that I have just procured. 6.5X54 Krag, 6.5 Japanese Carbine, and the Swede Mausers up to my Tikka M695 Master Trapper Whitetail Hunter in 6.5X55. Not to forget the M70 Winchester 6.5-06 that was great to load for and hunt with. I gathered that this particular rifle was bought by a right handed fellow who was unaware the Savage was a lefty so it hasn't been shot all that much. This will be my first Left handed Bolt rifle. It is being shipped out and I am getting some dies tout suite. Kind regards.
Reply With Quote
  #112  
Unread 08-11-2016, 03:31 PM
Bronze Member
 
Join Date: Dec 2008
Location: branson, mo
Posts: 45
Re: .264 win mag

Im going to build a sporter 26" barrel on a pre 64 action. I ordered a Brux barrel. My question is on the reamer what neck dia. would be best for the current brass. Win. brass is measuring .015 and I am thinking .002-3 neck clearance. Does this sound right. That would make a .296-97 reamer.
My factory barrel measures .300 with loaded rounds at.294 with factory brass. 7 mag brass resized measures .288. (Ugh). these are Win. brass and .012 neck wall thickness. Lots of resizing going on with this brass.
I wished Nosler brass wasn't so expensive. If someone has some Nosler brass can you measure the wall thickness for me. It might be worth the extra money.
thanks elton
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 11:54 AM.


Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC