close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Long Range Hunting & Shooting

Long Range Hunting & Shooting Nightforce Optics

Reply

20 moa pinitinny base for REM 700

LinkBack Thread Tools Display Modes
  #1  
Unread 08-02-2014, 01:22 PM
Bronze Member
 
Join Date: Aug 2013
Posts: 46
20 moa pinitinny base for REM 700

I am setting up a new 7mm rem mag Remington 700 long range hunter.
I am going to use a 20 MOA picitiny base and was wondering if anyone has used the extreme hardcore gear base with built in level?

I want to keep the gun as light as possible so I am looking at this base and aluminum TPS or Leupold Mark4 aluminum rings.

Is there another quality 20 moa aluminum picitiny base and rings I should consider?

Thanks
Reply With Quote
  •   #2  
    Unread 08-04-2014, 11:11 AM
    Junior Member
     
    Join Date: Nov 2010
    Location: Dalhart, TX
    Posts: 27
    Re: 20 moa pinitinny base for REM 700

    I use EGW 0 and 20 MOA on all of my bolt actions and have had no problems. They make steel and aluminum versions for most bolt action receivers.

    I also only use Vortex Precision Matched rings. They require no lapping and have served me well but they are a little pricey.
    __________________
    A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.
    ~George Washington

    Reply With Quote

      #3  
    Unread 08-04-2014, 11:38 AM
    Silver Member
     
    Join Date: May 2011
    Location: in the hills of vic AUS
    Posts: 216
    Re: 20 moa pinitinny base for REM 700

    yep seekins just did an upgrade with there 6/4 cap rings and one of there 20 moa rails and i'm impressed

    there rail has a decent recoil lug..
    Attached Thumbnails - Click to View Larger
    20 moa pinitinny base for REM 700-img_1303-small-.jpg  
    Reply With Quote
      #4  
    Unread 08-05-2014, 12:12 AM
    Bronze Member
     
    Join Date: Aug 2013
    Posts: 46
    Re: 20 moa pinitinny base for REM 700

    Bought the seekins 20moa aluminum rail.

    I'm thinking seekins,tps or Leupold mark 4 aluminum rings.

    I will check out the Vortex rings, thanks.
    Reply With Quote
      #5  
    Unread 08-05-2014, 12:13 AM
    Bronze Member
     
    Join Date: Aug 2013
    Posts: 46
    Re: 20 moa pinitinny base for REM 700

    Who sells the Vortex matched rings?
    Reply With Quote
      #6  
    Unread 08-05-2014, 12:27 AM
    Silver Member
     
    Join Date: May 2011
    Location: in the hills of vic AUS
    Posts: 216
    Re: 20 moa pinitinny base for REM 700

    Quote:
    Originally Posted by timberbuck View Post
    Who sells the Vortex matched rings?
    about half way down the page Optics :: Vortex :: Vortex Riflescopes :: Rings and Mounts - Long Range Hunting Supplies
    Reply With Quote
      #7  
    Unread 08-05-2014, 11:36 PM
    Bronze Member
     
    Join Date: Aug 2013
    Posts: 46
    Re: 20 moa pinitinny base for REM 700

    thanks
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 09:22 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC