Originally Posted by takedownsportfishing
Hey thanks for the help and quick response. I just ordered the 375 brass.
I'm using a lee pacesetter die. Any suggestions what to use when necking down the brass as far as methods and lubrication?
Read a little about it but always open for more info.
Any suggestions on labeling the brass to keep from getting rounds mixed up?
Glad to be part of the forum thanks for the warm welcome sorry if I ask any already answered threads.
Look forward to more help thanks!!!!
I'd neck to 338 or 30 first as a mid step.
I'd also use a lube with a bit of body as wildrose has said.
You won't be able to get this brass in a 375 after the form, so I'd load and label the box as usual.
You will likely have to pre-trim to square and then trim to square and length after the fireform.
I've fireformed my brass with lighter loads of 4831 and 120's and it did fine; you don't necessarily have to jamb a bullet here as the belt will headspace too, but it will help as to brass flow/ stretch while forming so you may want to use a bit heavier pill and find the lands.