close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Extreme Long Range Hunting & Shooting (ELR)

Extreme Long Range Hunting & Shooting (ELR) Over 1,000 Yds.

Reply

Folks reloading the 375s that are used in the ELR

LinkBack Thread Tools Search this Thread Display Modes
  #1  
Unread 10-11-2013, 09:51 AM
Bronze Member
 
Join Date: Sep 2013
Location: USA
Posts: 46
Folks reloading the 375s that are used in the ELR

Folks reloading the 375s that are used in the ELR

Within the year I will be reloading the 375 cal.
For the folks that are reloading this and loading for consistent accuracy at extended distances what are you using for a press for sizing and seating. Also what trimmer are you using as well with the larger case?
What are your opinions of the equipment used as well?

The dies will be 1.25Ē
Overall length of a loaded round is just under 5Ē


Cheers
osoh









After loading 1000s of 338LM and 260s itís time to stretch out some more, Redding T7 and RCBS Pro Trimmer
Reply With Quote
  •   #2  
    Unread 10-11-2013, 01:11 PM
    Gold Member
     
    Join Date: Jun 2011
    Location: Helena, MT
    Posts: 823
    Re: Folks reloading the 375s that are used in the ELR

    Which 375cal are you working with?
    __________________
    My dear boy if 5 miles away they don't sit up in their beds and ask what the HELL was that, the gun is not big enough!

    Riley: "Biggest fail of 2014 so far..."
    http://www.longrangehunting.com/foru...72/index4.html
    Reply With Quote

      #3  
    Unread 10-11-2013, 05:42 PM
    Bronze Member
     
    Join Date: Sep 2013
    Location: USA
    Posts: 46
    Re: Folks reloading the 375s that are used in the ELR

    Quote:
    Originally Posted by 500mag_guy View Post
    Which 375cal are you working with?

    The case length should be around 3.050”
    The overall length of the loaded round +/- 4.865”

    375VM2

    Cheers
    osoh
    Reply With Quote
      #4  
    Unread 10-12-2013, 11:09 AM
    Bronze Member
     
    Join Date: Sep 2013
    Location: USA
    Posts: 46
    Re: Folks reloading the 375s that are used in the ELR


    In time Iíll figure out whatís needed for the larger case for equipment, just was curious what the folks favored for equipment and why, when working with the Cheytac based rounds and maintaining the extended distance accuracy.

    Cheers
    oneshot.onehit
    Reply With Quote
      #5  
    Unread 10-12-2013, 11:34 AM
    Gold Member
     
    Join Date: Jun 2011
    Location: Helena, MT
    Posts: 823
    Re: Folks reloading the 375s that are used in the ELR

    .375 CEB 350 & GSC 414 at 2050 yards

    Kiwi Greg is the only one I recall recently using the 375 cal for ELH, he may be able to help you out a little more..

    Hope this helps, Eric
    __________________
    My dear boy if 5 miles away they don't sit up in their beds and ask what the HELL was that, the gun is not big enough!

    Riley: "Biggest fail of 2014 so far..."
    http://www.longrangehunting.com/foru...72/index4.html
    Reply With Quote
      #6  
    Unread 10-13-2013, 02:19 AM
    Silver Member
     
    Join Date: Nov 2008
    Location: Nelson, New Zealand
    Posts: 366
    Re: Folks reloading the 375s that are used in the ELR

    I have just been using a couple of Lee Classic Cast presses.

    I'm sure there a "better/flasher" presses available but they work for me for the Cheytac, VM & 50 cases as well as all the smaller ones.

    Make sure you use plenty of lube, the big cases have much, much more surface area in the dies.
    Reply With Quote
      #7  
    Unread 10-14-2013, 06:03 AM
    Bronze Member
     
    Join Date: Sep 2013
    Location: USA
    Posts: 46
    Re: Folks reloading the 375s that are used in the ELR

    Thanks for the reply Greg


    With yourself, Bill, Dave, Kirby, Jeff and a few others there is some good proven knowledge or info that can help when working with or getting into the larger case size.


    oneshot.onehit
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools Search this Thread
    Search this Thread:

    Advanced Search
    Display Modes



    All times are GMT -5. The time now is 04:39 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC