fletching tac arrows

[rc40099]

Can someone explain how to fletch tac arroows

[jon.henry755]

Hi rc40099,
Sure, what type of fletching jig are you planning on using?

Some of the other forum members at this site have some excellent u-tube video's available.

Once I know what tools you are planning on using, I can instruct you or direct you to the best sources for the right information.

Tell me about the fletching jig, vanes and glue type. Are you doing vane repair / replacement or fletching new shafts from scratch?

Regards,

Jon

[rc40099]

I have had my 15i about 2wks. I do not have any equipment. I need information on what to buy and where.

[jon.henry755]

Please read the following article and then I will give you the contact information for Firenock.

Aerovane Jig – Precision Worth the $$$ | Bowhunting.Net

If you should decide that you don't want to spend the money on the Aerovane Jig, below is another link on this forum to a series of threads that you should read thoroughly, since it provides more details about your new TAC15i than you can find anywhere else, including from the manufacture. By reading and retaining this material you will have detailed specifications that are critical to your accuracy.
Go to the last three or four pages of this topic and read very carefully. The first two pages are also worth reviewing.

TAC 15/15i Basic Unpublished Information


Let me know if you have any further questions?

If you need step by step instructions on how to set up or use your fletching equipment once you obtain it, either myself o Super 91 can provide you with this information.

Regards,

Jon

[Dorge]

Originally Posted by rc40099

Can someone explain how to fletch tac arroows

Here is a video I did specially for the tac arrow fletching on Youtube.com

YouTube - Firenock Aerovane Jig on Tac15 4 fletch

[jon.henry755]

Hi RC40099,
Apparently you've just gotten the attention of Dorge Huang. Dorge is the owner of the Firenock Company that produces the best nocks, vanes and fletching jigs that have been refined to deliver the accuracy most of us are looking for from our TAC15's.

He is the inventor of the Aerovane Jig that you were just reading about.

Jon

[OkieBowie]

Originally Posted by rc40099

I have had my 15i about 2wks. I do not have any equipment. I need information on what to buy and where.

I would purchase a string and cable replacement kit from PSE. I have already had to use one kit due to a factory string's thread wrap deciding to prematurely come un-done. Keep in mind, you ain't going to find these strings and cables at your remote backwoods hunting hut.

Being it is easy to loose the handy-dandy crank while traipsing through the woods in the dark, you might want to buy a spare. Also comes in hand if you just happen, mind you, to drop it from you all situated cozy tree stand, about the time deer show-up. Granted, you can piece an emergency crank together via square socket and ratchet.