Firenock will also offer the Aerovane Jig in 2 a complete package.The package which includes the Aerovane Jig, Aerovane Clamp, Aerovane Glue, 3+1 sets of chuck and v-notch combinations, 4 axis fully adjustable neck, base, space for a bottle of acetone and space for some Q-Tips, but there will be 2 in 2 grades of of 2 compartments carrying case (deluxe and normal) offered.These full protection carrying case allows archer to travel to the remotest places, but still have the ability to fletch arrows as if he was back at home. For those that want to travel light, the jig can easily separate from the neck with the twist of a knob. This design allows the archer to pick and choose how much gear to take with him/her to any specific destination.
Right side: (Embroider side of the bag) Aerovane Jig 2012 (enough space for Adjustable chuck and hook set), Laser Module,& Stainless clamp. Left side: (Non embroider side of the bag) Base plate, 4-way Adjustable Neck, Water Level, 4 chucks, & 3 hooks
Perfect refletching with Laser Alignment Module
Aerovane laser Alignment modules was developed to make vane refletching a single vane and alignment simple and fool-proof set up on Aerovane jig simple and fool-proof. The high precision one 3 lens optics system one which has a final line with of 0.25 - 0.55mm. To achieve perfect alignment, best precision and ease of use, the Aerovane laser modules are designed to be mounted about 75 mm right above the Aerovane Jig’s chuck via the 2 holes with its 2 screws, with which the laser line will span from the base of the clamp alignment line to the valley of the hook set at the top of the jig. With these optional laser modules, perfect single vane re-fletching can be done via any vane that is already installed on the arrow by eyes (which is believed to be 1/4 to 1/16 of a degree accurate). With these laser line alignment tools, one can precisely make perfect alignment from a perfect center line. The line laser modules will give a crisp red line on the arrow even shine through the clamp and vane are on the jig through between the clamp and on the vane when it is on the jig for perfect alignment.
After one full year of struggling by finding the right suppliers and listen to our customers, we have come up with the best and with no compromise on the Laser Alignment system.This ultra thin laser will allow you to re-alignment an arrow to within 1/4" of degree by alignment the next vane on the arrow to the jig's index. As most customer may not shot Aerovane, angle adjustments and position of the vane may need the neck to do just straight as our first design. By utilizing 2 X 4 way adjustment neck, plus a single plane laser rotational adjustment, it is believe that it can now handle any possible vane position and copy it to the index and the magnet alignments. Bellow is picture of Laser module mounted on an Aerovane Jig with Laser shinning on the vane, arrow shaft and jig index groove.